SK-AM62: How to output OLDI(LVDS) Display signals with Linux

Hello Koichiro,

I would recommend to use PSDK 8.6 because it had a couple of bug fixes from OLDI perspective. Also, please refer to the following section for enabling OLDI: https://software-dl.ti.com/processor-sdk-linux/esd/AM62X/08_06_00_42/exports/docs/linux/How_to_Guides/Target/How_to_enable_Microtips_LVDS_Panel_on_AM62_SK_EVM.html?highlight=lvds

Regards,
Krunal

Hi Krunal,

The customer wants to buy TI EVM with OLDI panel.
According to above document you pointed out, AM625 SK rev.E3 with Microtips Technology USA (13-101HIEB0HF0-S) 10.1” WUXGA (1920x1200) TFT LCD panel is one option.
Is this the only option?

Thanks and regards,
Koichiro Tashiro

Hi. Koichiro-san,

Yes, that's the only LVDS panel we support with our SK EVM. I believe you already have an internal thread on-going and please follow up there to get access to the panel. 

Regards,
Krunal

Hi Krunal,

Thanks for your quick reply.

Krunal Bhargav34 said:

I believe you already have an internal thread on-going and please follow up there to get access to the panel. 

I do not know the internal thread. Could you let me the thread?

And I found another E2E thread below and it seems an adapter board is required. If so, does this come with the panel?
https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1161238/sk-am62-recommended-lcd-panel-for-j21/4368210#4368210

Thanks and regards,
Koichiro Tashiro

Hi Koichiro,

I have assigned your thread to the HW expert and they can provide you with more details on the panel and adapter board requirements.

Regards,
Krunal