SK-AM62A-LP: TIDA-01413 debug

zhangpeng

Part Number: SK-AM62A-LP
Other Parts Discussed in Thread: TIDA-01413

we have a TIDA-01413, which consists of two ds90ub960, the sensor is raw imx390+ds90ub953, and the processor is am62a. The stream capture succeeded, but the image is all black, could you please help support it，thanks you。

over 3 years ago

0 Yogesh Siraswar over 3 years ago

TI__Mastermind 21495 points

Could you please provide the changes you have done for imx390 camera.

0 zhangpeng over 3 years ago in reply to Yogesh Siraswar

Prodigy 120 points

We did not change the imx390 camera. previous ds90ub954+ds90ub953+imx390, but replaced ds90ub954 with TIDA-01413

0 Suren Porwar over 3 years ago in reply to zhangpeng

TI__Mastermind 36030 points

Hi Zhangpeng,

Could you share the logs and also the GStreamer pipeline that you used to capture the stream or display it.

Best Regards,

Suren

0 zhangpeng over 3 years ago in reply to Suren Porwar

Prodigy 120 points

Hi Suren Porwar，

I see that there is no OX03CC sensor driver in the SDK, can you provide this sensor driver?

0 Suren Porwar over 3 years ago in reply to zhangpeng

TI__Mastermind 36030 points

Hi Zhangpeng,

You have to work with the vendor for linux driver support. We don't develop sensor driver. We can help in tuning the sensor once the driver is developed.

Best Regards,

Suren

0 zhangpeng over 3 years ago in reply to Suren Porwar

Prodigy 120 points

The vendor only provides register configuration, which needs to adapt to the sensor driver of TI platform

0 zhangpeng over 3 years ago in reply to Suren Porwar

Prodigy 120 points

Or is there have documentation of camera programming?

Or refer to which sensor driver to write a new sensor driver code?

Processors

Processors forum

SK-AM62A-LP: TIDA-01413 debug