• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 97 subscribers
  • Views 288 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

TDA4VM: There's no usb device found in PC while cofiguring usb0 to otg mode

TDA4VM: iperf3 test including UDP and TCP

Gokul Mani
Prodigy 40 points

Part Number: TDA4VM

i had inserted usb ethernet module by 

modprobe g_ether

Host

sudo ifconfig usb0 192.168.7.1 netmask 255.255.255.0 up

Target

sudo ifconfig usb0 192.168.7.2 netmask 255.255.255.0 up

Now i'm able to ping them from/to host and pc.

My question is now how to Perform iperf3 test including UDP and TCP and get the best numbers (j721evm)

  • 0
    TI__Mastermind 43890 points

    Hi,

    To run iperf3 tests use the following commands:

    Iperf3 server:

    • iperf3 -s

    Iperf3 client:

    • TCP : iperf3 -c $server_ip
    • UDP : iperf3 -c $server_ip -u -b0

    Both server and client can be run on host and target. Run server on one and client on other.

    Regards,
    Tanmay