• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 97 subscribers
  • Views 277 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

PROCESSOR-SDK-J784S4: BSP for TDA4VH Regarding

Jeevasubrmaniam Manoharan
Prodigy 30 points
Part Number: PROCESSOR-SDK-J784S4
Other Parts Discussed in Thread: TDA4VH

Hi,

Could you please clarify the BSP version needed for PROCESSOR-SDK-QNX-J784S4(TDA4VH).

According to psdk_qnx_setup_qnx710.sh  in PROCESSOR-SDK-QNX-J784S4,it says BSP_ti-j784s4-evm_br-710_be-710_SVN964349_JBN4.zip is needed.

But BSP_ti-j784s4-evm_br-710_be-710_SVN964349_JBN4.zip is not available in QNX software center.

In QNX software center,BSP_ti-j784s4-evm_br-710_be-710_SVN979845_JBN12 is only available.

Could you please clarify the BSP version needed for TDA4VH.

Thanks and Regards,

Jeeva M

  • +1
    TI__Guru** 120551 points

    Hi Jeeva,

    The BSPs which the TI QNX SDKs are verified against are listed in the SDK release notes.   For the TDA4VH TI QNX SDK 8.6 this can be seen at: 4.1. Release notes - 08_06_00 — Processor SDK QNX J784S4 (ti.com), and it will co-relate to BSP_ti-j784s4-evm_br-710_be-710_SVN964349_JBN4.

    When TDA4VH TI SDK QNX 8.6 was released the JBN4 BSP was the only BSP that was available.   

    When TDA4VH TI SDK QNX 9.0 is released, it will be verified against BSP_ti-j784s4-evm_br-710_be-710_SVN979845_JBN12.

    If BSP_ti-j784s4-evm_br-710_be-710_SVN964349_JBN4 is not visible in QNX Software Center, QNX Blackberry can be contacted for access.

    Regards,

    kb