• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 98 subscribers
  • Views 292 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

PCB Layout with DM3730 and TPS65950

fmanc
Prodigy 10 points
Other Parts Discussed in Thread: TPS65950, DM3730

I was wondering if anyone has had experience in developing their own DM3730 and TPS65950 based printed circuit board. I am a little concerned about the pitch on these IC's. Any experience (good or bad) would be appreciated. Thanks.

  • 0
    Prodigy 100 points

    We don't have any direct experience yet, but will shortly.  Gerbers are available for the Beagleboard, which uses both chips.  They appear to be using filled microvias directly on the BGA pads, and were careful to keep data bus lines the same length to equalize propogation delays.  Let me know if you have gained any experience in the mean time.

    TL