[C6713] Interrupt handelling

Please try the following in order to narrow down the issue.  I'd like you to intentionally NOT SET the bit in the IER corresponding to the interrupt you're trying to get.  In doing so you can now look at the IFR to see if that interrupt ever gets latched in the register.

Also, please provide some more information about what you are doing.  Which interrupt are you trying to get (e.g. Timer, McBSP, etc.) and which maskable interrupt have you mapped it to?

Brad

Am trying McBSP mapping with int11

But am using CCS v3.0....what to do...

Just change the directory shown in the previous post to "C:\CCStudio\examples\dsk6713\bsl\dsk_app\dsk_app.pjt" instead. The installation directory is arbitrary, so we show the default paths we have just to make it a little less confusing.

You should have gotten a CD with the DSK that includes Target Content for that board. This includes the Board Support Library (BSL) for the DSK6713 which has the example Mariana pointed to in her post.

oh....ok...ok....

hi.....

I got CCS v3.0 with my DSK6713...Can i change CCS version 3.0 to 3.3......

Hi, to get CCS 3.3 you need to buy it:

http://focus.ti.com/docs/toolsw/folders/print/ccstudio.html

Here is a small sales pitch: The price of CCS has been lowered from $3500 to $995 for the rest of the year, so now is a good time to purchase.

Harry

hi..

Am having CCS v3.3.But the version which comes with my kit is v3.0.Am asking u that , whether can i use v3.3 on the same kit(After uninstalled old version).

There should not be an issue using CCS v3.3 with the DSK6713.