• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 100 subscribers
  • Views 293 views
  • Users 0 members are here
Support feedback
Options
Options

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TDA4VM: DCC(Dual Clock Comparator) module inside the TDA4

zhisong zheng
Intellectual 431 points
Part Number: TDA4VM

Hi

I ran into the same problem as the link below：

https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1134240/tda4vm-dcc-dual-clock-comparator-module-inside-the-tda4/4211781?tisearch=e2e-sitesearch&keymatch=MCU_DCC#4211781

The link to fix the problem in the post is no longer working.

 [PROC_SDL-3701] DCC: Value to select Input0 clock other than clock0_0 is not correct - Texas Instruments JIRA.

The link to fix the problem, can you send it again？

  • 0
    TI__Guru** 110681 points

    Hi,

    Can you please reach out to your local TI contact in order to get access to the patch. 

    In parallel, TI will attempt to get the patch to you offline.

    Regards,

    kb