• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 99 subscribers
  • Views 366 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TDA4VM: Command ack message returned failure cmd_status: -1

user6406170
Intellectual 375 points

Part Number: TDA4VM

When I test the stability of the program(psdk 7.1),

i startup program and exits the program many times

Mostly as expected, but sometimes an error occurs and you have to restart the board to recover

Could you please tell me when this error will occur and how to avoid it

When an error occurs, the log is as follows

  • 0
    TI__Guru* 88071 points

    Hi,

    Could you run "source ./vision_apps_init.sh" once before you run the application? 
    This would provide the remote core logs from C7x core.

    Please provide this log along with the application log. Please provide the log in a .txt file.

    Regards,

    Nikhil