SK-AM62B: SDK9.0, customer needs the ETH wakeup on LAN

Hi,

To my knowledge we do not have a WOL document for ethernet currently. This could a couple of different things. Is the customer just wanting to wake the PHY or the device? 

Best Regards,

Schuyler 

Hi Schuyler :

Yes, they need this feature.

I have tested the AM62 LPM EVM for the RTC wakeup + sleep.

So, the rest of thing is to have this guideline for the WakeOnLAN.

BR Rio

Hi Rio,

Let me discuss with the development team on what possible next steps are.

Best Regards,

Schuyler

Hi Schuyler:

THanks.

If Sitara has the LPM module, I believe most of the case, the customers will need the WOL.

So, we shall this kind of porting guild or some example documents to let the user follow.

BR Rio

Hi Rio,

We are still researching, at the moment we do not have a guide to follow. 

Best Regards,

Schuyler

Hi Schuyler:

Sorry, customer needs this on their PCB.

And this is hard requirement for this cust....

BR Rio

BTW, this old SDK indicated the cpsw2G has no supporting for WOL.

May you confirm if this is true?

I believe similar discussion on the other thread

https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1269531/sk-am62-lp-the-standby-mode-for-hs-issue/4837810

I will close this thread