Programming Empty Flash

Eric W

If we put a Integra + NOR flash on a board and the flash is empty, what is the preferred way to program the flash? If we tie the configuration lines to boot from flash, will we still be able to boot from a debug emulator device with an empty flash?

over 14 years ago

0 MarcPyne over 14 years ago

TI__Mastermind 25055 points

Eric,

Please refer to the PSP FlashingTools document in the EZSDK.

Regards,
Marc

0 Mansoor Ahamed over 14 years ago in reply to MarcPyne

TI__Intellectual 2615 points

Hi Eric,

The online versions of these documents are available at the below mentioned locations.

DM8168 : http://processors.wiki.ti.com/index.php/DM816x_C6A816x_AM389x_PSP_Flashing_Tools_Guide

DM8148: http://processors.wiki.ti.com/index.php/DM814x_C6A814x_AM387x_PSP_Flashing_Tools_Guide

Regards

Mansoor

0 Eric W over 14 years ago in reply to Mansoor Ahamed

Prodigy 110 points

This is helpful. Thanks.

Processors

Processors forum

Programming Empty Flash