USB stack on DSP side for DM8148 processor.

Mahantesh Kumbar71529

hello,

I need USB stack on DSP side for DM8148 processor, can anybody help me to get some code or library for USB stack on DSP side for DM8148 processor.

over 14 years ago

0 David Friedland over 14 years ago

TI__Mastermind 18320 points

Mahantesh,

SYS/BIOS has no specific support for USB on the DM8148 device. I am going to move this thread over to the DM814x Processor Forum in hopes that it will get a faster response there.

Dave

0 Gagan Maur over 14 years ago in reply to David Friedland

TI__Expert 8150 points

Mahantesh, at this point we dont have ready USB stack on DSP. What are your requirements and what timelines you are considering for this support?

Cheers,
Gagan

0 Mahantesh Kumbar71529 over 14 years ago in reply to Gagan Maur

Prodigy 50 points

Hello Gagan, Thanks for the response, I have two requirements here for USB on DSP (C674x) side & need support within two weeks of time.

1- We are interfacing USB to the modem chip, so we need the USB Modem Driver (Serial) that interfaces to the Modem over USB.

2- As USB mass storage device.

Mahantesh

0 Gagan Maur over 14 years ago in reply to Mahantesh Kumbar71529

TI__Expert 8150 points

Mahantesh, unfortunately we wont have DSP support for DM814x in this timeline. We will have support enabled later in 4Q.

Cheers,
Gagan

Processors

Processors forum

USB stack on DSP side for DM8148 processor.