DM8168 Netra Develoment Board

Amol Jagtap

Hi ,

I have DM8168 Netra Develoment Board It is not booting from the SD card . The development board is getting start or power in by showing the led blinking .

I am following all the steps and the setting which are mentioned in the quick start guide.

From

Amol Jagtap

9890007138

over 14 years ago

0 Satish Patel over 14 years ago

TI__Expert 4390 points

Hi Amol,

Which link are you referring for quick start guide?

Last release on DM816x is avavailble at

http://software-dl.ti.com/dsps/dsps_public_sw/sdo_tii/TI_Android_DevKit/TI_Android_GingerBread_2_3_DevKit_2_0/index_FDS.html

User Guide:

http://processors.wiki.ti.com/index.php/TI_Android_GingerBread_2.3_DevKit_2.0_UserGuide

satish

0 Pankaj Bharadiya over 14 years ago in reply to Satish Patel

TI__Expert 5400 points

Hi Amol,

What is the revision of your board?

Which DDR it is having (DDR2/DDR3) ?

Please note if your board has DDR2 then it will not boot with the prebuilt Image. You have to modify u-boot to make it work.

The prebuilt image works fine with DDR3 boards.

Thanks and Regards,

Pankaj Bharadiya.

Processors

Processors forum

DM8168 Netra Develoment Board