CCSTUDIO: CCS13.20

hubihua2019

Prodigy 10 points

Part Number: CCSTUDIO

I have use the CCS13.20 to gain bin file for some days.However,My CCS 13.20 can not generates bin file from this morning and gives the errors message as follow.
"D:/ti/ccs1230/ccs/utils/tiobj2bin/tiobj2bin.bat" "X3600S_BAT_F280039C_APP.out" "X3600S_BAT_F280039C_APP.bin" "D:/ti/ccs1230/ccs/tools/compiler/ti-cgt-c2000_22.6.0.LTS/bin/armofd.exe" "D:/ti/ccs1230/ccs/tools/compiler/ti-cgt-c2000_22.6.0.LTS/bin/armhex.exe" "D:/ti/ccs1230/ccs/utils/tiobj2bin/mkhex4bin.exe"
D:/ti/ccs1230/ccs/utils/tiobj2bin/mkhex4bin.exe failure occurred. Giving up.

not well-formed (invalid token) at line 1, column 12, byte 12 at XML/Parser.pm line 187."

over 1 year ago

0 George Mock over 1 year ago

TI__Guru**** 249215 points

For background on this step, please see the Pre and Post Build Steps part of the CCS online manual. The sentence that applies here is ...

Be sure to replace ofd2000 and hex2000 with the respective binaries for your device, for example, ofd6x and hex6x (for c6000) or armofd and armhex (for ARM).

In your specific case, replace armofd.exe with ofd2000.exe, and armhex.exe with hex2000.exe.

Thanks and regards,

-George

0 hubihua2019 over 1 year ago in reply to George Mock

Prodigy 10 points

My project is for dsp(280039C)

0 George Mock over 1 year ago in reply to hubihua2019

TI__Guru**** 249215 points

I presume you changed the post build step command. What does it look like now?

Thanks and regards,

-George

Processors

Processors forum

CCSTUDIO: CCS13.20