SK-AM62-LP: Based on the SK-1 panel, third-party panel Porting.

Hello Vic,

First, to set expectations: We can support questions about TI software and TI hardware on these forums. We cannot support questions about modifying drivers, especially if the driver was not even written by TI. Thus, we cannot support "Private Porting for issues in the third-party panel drivers".

Another team member will reply about your request for a schematic review.

Regards,

Nick

Hello Vic Chang,

Thank you for the query.

Vic Chang said:

2. We have designed a circuit board for adapting the third-party panel based on the SK-1.

Help me understand what you mean by SK-1

Vic Chang said:

2. We have designed a circuit board for adapting the third-party panel based on the SK-1.

Help me understand the interface used for the panel. 

Regards,

Sreenivasa

Hi Nick Saulnier 

The driver porting has been completed.

There are some design details that I would like to discuss privately.

Hi Kallikuppa Sreenivasa 

SK-LCD1 Evaluation board | TI.com

The current situation is as follows: In the original design by TI, using this panel requires a conversion circuit board.

Here, we are verifying the functionality and circuit of AM62-LP + SK-1.

We have designed our own conversion circuit board based on this information.

Hi Nick Saulnier  Kallikuppa Sreenivasa 

I would like to discuss this privately.

Most of the functions have been completed, but I believe that some detailed information may need to be provided to other vendors, including specifications and current photos or videos.

Hello Vic Chang,

Thank you.

Vic Chang said:

I would like to discuss this privately.

Most of the functions have been completed, but I believe that some detailed information may need to be provided to other vendors, including specifications and current photos or videos.

I am not sure i understand your comments. please help me understand the requirements.

Regards,

Sreenivasa

Hi Nick Saulnier   Kallikuppa Sreenivasa 

Currently, I am working on developing panels and touchscreens for other vendors.

I am using the SK-LCD1 as the foundation circuit and making modifications.

However, there are some issues, possibly related to SOC control.

I would like to discuss potential SOC-related issues, but since there is information from other vendors involved

I want to have a private discussion.

Hello Vic Chang,

Thank you.

If will assign the thread to the EVM expert working on the display panel to support.

Regards,

Sreenivasa