SK-AM62A-LP: there is no CSI MIPI connector on the board.

byoungsoo noh

Part Number: SK-AM62A-LP

Hi.

We recently ordered the evm board(it has "PROC135E3" in silkscreen).

There is no CSI MIPI connector.(there is only CSI 22 pin flex connector)

If we want to use the CSI MIPI connector, could you guide how to use it?

Thanks you.

0 Jianzhong Xu over 1 year ago

Hello,

We have a limited number of SK-AM62A-LP boards that have the MIPI CSI connector. You'll need to specially order it through your local FAE.

May I ask why you need to use the MIPI CSI connector?

Regards,

Jianzhong

0 byoungsoo noh over 1 year ago in reply to Jianzhong Xu

We are considering a connection of camera to the board. So I am looking for how to connect it.

Could you share a list that deserializer board is possible to connect with the evm board using CSI 22 pin flex connector?

Thanks

0 Jianzhong Xu over 1 year ago in reply to byoungsoo noh

Arducam has a deserializer board that can connect to the SK-AM62A-LP board through the 22-pin flex connector. For more details, please refer to https://docs.arducam.com/V3Link-Camera-Solution/V3Link-Camera-Solution-on-TI-Platform/Introduction/.

Regards,

Jianzhong

Processors forum