TDA4AL-Q1: OSPI Write No Response

Gibbs Shih

Part Number: TDA4AL-Q1

Hi, TI Expert

This is customer board, they use OSPI flash (S28HS512TGABHM013), same as TDA4AL EVB.

Already check HW schematic, it seems no different between EVM & customized board.

Write Error message as below.

u-boot seems recognize OSPI flash, I guess OSPI flash should be work.

May you give us some debug direction?

Many Thanks

Gibbs

0 Praveen Rao over 2 years ago

Hello Gibbs,

what boot mode is the customer trying? Is is OSPI or xSPI?

Also what is being used to flash the OSPI?

Thanks.

0 Gibbs Shih over 2 years ago in reply to Praveen Rao

Hi, Praveen.

Feed back from customer, Issue solved.

You need erase OSPI flash when first time use.

Thanks

Gibbs

Processors forum