• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 97 subscribers
  • Views 166 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SK-TDA4VM: J721E QNX SDK boot fails in SK-TDA4VM board

Dineshkumar Subramanian
Prodigy 70 points
Part Number: SK-TDA4VM


Hi All,
As per last discussion, the proposed approach for the SK-TDA4VM QNX Academy demo doesn't work for us.
We have built the TI-PSDK QNX package for J721E EVM and tried to boot it in SK-TDA4VM board.
From the boot log, I have found that the SD Card mounting failed for /dev/sd0. Also understand that we may need to configure the SD Card memory mapping in the start of QNX BSP.
I have attached the boot log for your reference.
Could you please advise us on the issue.
Regards,
Dinesh kumar S
  • 0
    TI__Guru** 122491 points

    Hi Dinesh,

    There was no attachment on previous post.   In regards to SK-TDA4VM QNX Academy does not work, could you please provide details on this?  Is the SD card not mounting on the setup provided there?

    The J721EVM and SK-TDA4VM are different boards.  Have board schematics been reviewed, and board differences accounted for, for how MMC1 H/W module is used on those setups?   Any required changes at the QNX BSP would be present in the SK-TDA4VM QNX Academy approach.

    Regards,

    kb