• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 98 subscribers
  • Views 430 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

HPI interfacing

Giuseppe Aliperti
Prodigy 130 points

Other Parts Discussed in Thread: TMS320C6748

Hi there!
I was working about the interfacing between a DSP TMS320C6748 and an fpga xcs200a by HPI
For this reason I ask to you if you can give to me some advices about documentation and implementation of this work!
Thanks!

  • 0
    TI__Guru* 84110 points

    Giuseppe Aliperti,

    Go to the Product Folder by clicking on the red link for TMS320C6748, and find the Technical Reference Manual (TRM) near the top of the page. Search the TRM for the HPI and you will find the documentation on how the HPI works. Remember that it is a slave port on the DSP, so the FPGA will be initiating all reads and writes.

    Regards,
    RandyP

     

    If you need more help, please reply back. If this answers the question, please click  Verify Answer  , below.