TMS320C40: Modifying your code for emulator change

Emmanuel

Emulators usually grouped in to "classes", XDs510 being one.  Is you your new emulator and XDS100, XDS110, XDS200, or perhaps a XDS560 class of device? 

Have you checked if CCS already has support?

If your new emulator is not supported, adding support is beyond what we, in this forum, can advise on.  I suggest you submit you question directly yo the Code Composer Studio forum: https://e2e.ti.com/support/tools/code-composer-studio-group/ccs/f/code-composer-studio-forum

--Paul 

Good-morning Paul,

I bought an xds200prob, and installed the compatible version of ccs. But when I load but old files which were developed under cc 4.0 I cannot connect to my card via the xds200 it absolutely searches for the old xds510 ISA card which of course is not recognized by windows xp or higher .

Regards,

Emmanuel

Have you tried to create a new target configuration, specifying the XDS200 as the emulator?  If it's not an available option, I recommend postiing in the CCS for additional help. 

--Paul

Hi Paul,

Yes I tried to configure it in ccs, but when I launch the existing emurst application it only wants to look for the old ISA car emulator.
So when launching the application it cannot find the target.

OK,  my suggestion is that you post your question to the CCS forum (https://e2e.ti.com/support/tools/code-composer-studio-group/ccs/f/code-composer-studio-forum) as this is beyond what we can support here.