Hi there,
To make sure the CRC works I wanted to compare the checksum using an online calculator so i need information about the following values which I could not find in the data sheet:
Best regards
Daniel
Hi Daniel,
You can refer to our SDL example for MCRC on this link: https://software-dl.ti.com/jacinto7/esd/processor-sdk-rtos-jacinto7/latest/exports/docs/sdl/sdl_docs/userguide/j721e/modules/mcrc.html
Apart from these, you can refer to the below links listed for generating CRC for comparison.
/* Initialize and perform the 16 bit CRC computation:
* Refer to the following link:
* http://www.sunshine2k.de/coding/javascript/crc/crc_js.html */
/* Initialize and perform the 32 bit CRC computation:
* Refer to the following link:
* http://www.sunshine2k.de/coding/javascript/crc/crc_js.html */
/* This is the computed CRC using the software algorithm:
* Refer to the following link:
* http://www.zorc.breitbandkatze.de/crc.html
* NOTE: If the data is modified then there will be a failure
* and a new CRC64 has to be generated from the above link */
The calculated MCRC values are matching with the values observed for the MCRC block.
Regards,
Josiitaa
