PROCESSOR-SDK-J721E: MIPI60 Debugger connector

Karuppusamy Subiramaniam

Hi Team,

While purchase the J721E-EVM we got a MIPI60 PIN small PCB board for connect with Lauterbach. I have attached the image of that in this thread.

We missed the MIPI60 PIN small PCB, so could you please let me know how to buy that one.

Back view:

Front view:

Thanks & Regards,
Karuppusamy Subiramaniam
karuppusamy.subiramaniam@aptiv.com
Mobile: +91-9344292810

over 1 year ago

0 Richard Woodruff over 1 year ago

TI__Mastermind 24285 points

Hello,

For the J721E-EVM the proper connector to go from the Lauterbach ARM20 header to a MIPI-60 header is the LA-3818.

https://www.lauterbach.com/products/LA-3818

To go from a CombiProbe's MIP34 an LA-3784 is correct

https://www.lauterbach.com/products/LA-3784

It is possible to 'stack' adaptors like an ARM20-to-cTI20-to-MIP60 but there can be reset issues and the trace signals will be stripped off. What you show above appears to be a wire wrapped cTI-20 to MIPI-60. That still would need an LA-3780 to work with a J7EVM.

https://www.lauterbach.com/products/LA-3780

Regards.

Richard W.

Processors

Processors forum

PROCESSOR-SDK-J721E: MIPI60 Debugger connector