Does AM1808 have standby mode?

Anonymous

Other Parts Discussed in Thread: AM1808, OMAPL138

Hi,

I have seen that OMAP L138 has standby mode which according to http://www.ti.com/product/omap-l138 consumes as low as 36mW power.

For ARM 9 devices, including AM1808, does there exist the same standby mode? I checked AM1808 documents but didn't find relevant information.

Zheng

over 14 years ago

0 Mukul Bhatnagar over 14 years ago

TI__Guru* 83885 points

Zheng

AM1808 is a pin and software compatible ARM only offering from the same design family that offers the ARM+DSP OMAPL138. So it has similar standby and deep sleep modes.

Recommend looking at the power consumption summary app note and spreadsheet to get a better handle on power consumption

http://processors.wiki.ti.com/index.php/AM18x_Power_Consumption_Summary

Similar data is also available for OMAPL138.

Power Management features for the device, under Linux is highlighted in the following wiki

http://processors.wiki.ti.com/index.php/OMAP-L1_Linux_Drivers_Usage#Power_Management

Regards

Mukul

0 Anonymous over 14 years ago in reply to Mukul Bhatnagar

Mukul,

These links resolved my questions. Thanks very much for your quick answer.

Zheng

Processors

Processors forum

Does AM1808 have standby mode?