Code Composer flashwriter_nand.out

Elvis Mota

Hi,

I'm working on a design using the DM365. I want to load UBL into NAND Flash using the Black Hawk emulator (LAN560).

T.I's webpage on programming the UBL using the emulator (http://tinyurl.com/3wjjdgl) instructs me to download "The CCS NAND programmer and NAND eraser".

However, the link on that page is bad.

Where can I find the flashing utiltiy programs for the Emulator? i.e. flashwrite_nand.out?

Thanks

over 14 years ago

0 Prateek Bansal over 14 years ago

TI__Expert 4510 points

Hi Elvis,

Which DVSDK version are you using? Link points to DVSDK 3.10 Flashwriter files. For me the link is working. I have attached the board_utils.tar.gz file for your reference.4426.board-utils-davinci.tar.gz

For latest DVSDK v4.x, the link to download these files are http://software-dl.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/dvsdk/DVSDK_4_00/latest/index_FDS.html

The files are part of installer program dvsdk_dm365-evm_4_02_00_06_setuplinux on the link above.

I would also have suggested same above considering the issues you are seeing with UART "BOOTME" mode not displaying at all. I have come across these issues at times when the flash is empty or corrupted at times.

Prateek

Processors

Processors forum

Code Composer flashwriter_nand.out