SK-AM69: booting

Sagar patil

Part Number: SK-AM69

Hi!

I inserted micro SD card in the slot and powerd ON the kit with 90W Dell charger. It is showing Edgi AI galley images. After closing the tab with top right 'X' it shows Evaluation kit photo with ip adress and PW. How to proceed for processor programming or LINUX installation?

over 1 year ago

0 Fabiana Jaimes over 1 year ago

TI__Mastermind 19670 points

Hi Sagar,

Have you seen the edge AI SDK documentation for SK-AM69? Here is the software getting started page: https://software-dl.ti.com/jacinto7/esd/processor-sdk-linux-am69a/09_02_00/exports/edgeai-docs/devices/AM69A/linux/getting_started.html#software-setup

Please review and let me know if you have any questions.

Thank you,

Fabiana

0 Sagar patil over 1 year ago in reply to Fabiana Jaimes

Prodigy 70 points

thank you! I flashed the image given by your suggested link. it is giving almost same image page that I got with Evaluation SD card. My problem is installation of LINUX/ REDHAT and programming the processor for my use and applications.

0 Fabiana Jaimes over 1 year ago in reply to Sagar patil

TI__Mastermind 19670 points

Hi Sagar,

You can connect to the processor via UART or remotely using ssh. The steps for doing so are below those you followed to flash the image.

Please let me know if the steps are clear.

Thank you,

Fabiana

Processors

Processors forum

SK-AM69: booting