AM625: AM62

Swapnil S

Part Number: AM625

We tried the v8.06 image since it is one of the workarounds for this issue, but it won't work for us since our board variant is different.

can anybody give me WIC image link/path for TI AM62-LP board.

Package name is: tisdk-default-image-am62xx-lp-evm.wic.xz

0 Yogesh Siraswar over 1 year ago

Swapnil,

The LP board support was added in 9.0

So you will need to follow the e2e thread referenced above and make the below changes and rebuild the boot binaries:

"CONFIG_LEGACY_IMAGE_FORMAT=y"

Thanks

Yogesh

0 Swapnil S over 1 year ago in reply to Yogesh Siraswar

thanks for your assistance. Can you share me the complete build procedure for the same? preferably for windows host.

0 Swapnil S over 1 year ago in reply to Yogesh Siraswar

Hi Yogesh,

According to above thread, even we do this CONFIG LEGACY flag change. It will stuck in kernel launch. find screenshot for the same.

so according to above thread, we need to use v8.06, but you are saying that this is not available for LP board.

we stuck here. we tried with v8.06 but it does not enter in uboot. only uboot version print and does not move further. find screenshot for the same.

+1 Yogesh Siraswar over 1 year ago in reply to Swapnil S

Swapnil,

With 9.0 change uboot will launch vxworks. After that you need to work with Vxworks expert to resolve any issue.

Thanks

Yogesh

0 Swapnil S over 1 year ago in reply to Yogesh Siraswar

Can you share me the complete build procedure for the same? preferably for windows host.

+1 Yogesh Siraswar over 1 year ago in reply to Swapnil S

Please refer to linux academy: Develop Linux on TI EVM

Processors forum