Other Parts Discussed in Thread: SK-AM62-LP, SK-AM62B-P1, SK-AM62
Hello,
This is a follow-up of previous threads and discussion from months ago:
Software/Hardware configuration:
- TI SDK 09.02.01.09
- Custom HW (various configurations of memory size and memory vendor, different SOC variants: AM6254, AM6231, AM6252)
- Kernel sources: https://git.toradex.com/cgit/linux-toradex.git/log/?h=toradex_ti-linux-6.1.y
- U-Boot sources: https://git.toradex.com/cgit/u-boot-toradex.git/log/?h=toradex_ti-u-boot-2023.04
- The DDR was validated both internally by us and by the memory vendor on its premises. We have variants with memory with different sizes and vendors and they are all affected by the same issues
- We have variant with 0.75V and 0.85V VDD_CORE, no differences on the behavior because of this
During the testing of our software/hardware, we faced some issues with the boot stalling in different ways. They all happen below -20 Celsius degrees.
1. system stalls with the following error.
[ 86.779029] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: [ 86.785173] rcu: Tasks blocked on level-0 rcu_node (CPUs 0-0): P186/1:b..l [ 86.792151] (detected by 0, t=18276 jiffies, g=6889, q=115 ncpus=1) [ 86.798506] task:systemd-udevd state:R running task stack:0 pid:186 ppid:173 flags:0x00000a04 [ 86.808424] Call trace: [ 86.810870] __switch_to+0xd4/0x130 [ 86.814374] __schedule+0x230/0x664 [ 86.817863] preempt_schedule_irq+0x44/0xd0 [ 86.822047] el1_interrupt+0x4c/0x70 [ 86.825626] el1h_64_irq_handler+0x18/0x2c [ 86.829725] el1h_64_irq+0x64/0x68 [ 86.833130] set_root+0x64/0xfc [ 86.836275] nd_jump_root+0xb8/0xf0 [ 86.839764] path_init+0x2d0/0x380 [ 86.843167] path_parentat+0x20/0xb0 [ 86.846743] __filename_parentat+0xa4/0x1c0 [ 86.850927] do_unlinkat+0x68/0x270 [ 86.854416] __arm64_sys_unlinkat+0x40/0x84 [ 86.858600] invoke_syscall+0x48/0x114 [ 86.862352] el0_svc_common.constprop.0+0xd4/0xfc [ 86.867057] do_el0_svc+0x20/0x30 [ 86.870372] el0_svc+0x28/0xa0 [ 86.873428] el0t_64_sync_handler+0xbc/0x140 [ 86.877701] el0t_64_sync+0x18c/0x190 [ 86.881364] rcu: rcu_preempt kthread timer wakeup didn't happen for 18273 jiffies! g6889 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402 [ 86.892749] rcu: Possible timer handling issue on cpu=0 timer-softirq=2071 [ 86.899705] rcu: rcu_preempt kthread starved for 18274 jiffies! g6889 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402 ->cpu=0 [ 86.910136] rcu: Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior. [ 86.919260] rcu: RCU grace-period kthread stack dump: [ 86.924305] task:rcu_preempt state:I stack:0 pid:14 ppid:2 flags:0x00000008 [ 86.932656] Call trace: [ 86.935099] __switch_to+0xd4/0x130 [ 86.938587] __schedule+0x230/0x664 [ 86.942074] schedule+0x5c/0xcc [ 86.945216] schedule_timeout+0x84/0xfc [ 86.949055] rcu_gp_fqs_loop+0x12c/0x46c [ 86.952983] rcu_gp_kthread+0x128/0x164 [ 86.956820] kthread+0x10c/0x110 [ 86.960051] ret_from_fork+0x10/0x20 [ 86.963627] rcu: Stack dump where RCU GP kthread last ran: [ 86.969111] CPU: 0 PID: 181 Comm: systemd-udevd Not tainted 6.1.80+git.0d9f1748ac17 #1 [ 86.977026] Hardware name: Toradex Verdin AM62 WB on Verdin Development Board (DT) [ 86.984591] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 86.991550] pc : iomap_read_reg+0x10/0x30 [m_can_platform] [ 86.997049] lr : m_can_get_berr_counter+0x3c/0x10c [m_can] [ 87.002548] sp : ffff8000099735f0 [ 87.005858] x29: ffff8000099735f0 x28: 0000000000000240 x27: ffff800000cca1a0 [ 87.012998] x26: ffff000003f9e000 x25: ffff000003f9e240 x24: 0000000000000000 [ 87.020137] x23: 0000000000000000 x22: ffff0000002ae410 x21: ffff0000035f8000 [ 87.027276] x20: ffff0000035f8980 x19: ffff80000997362c x18: 0000000000000000 [ 87.034414] x17: ffff800014add000 x16: ffff800008000000 x15: 0000000000000000 [ 87.041552] x14: 000000000000022f x13: 0000000000000001 x12: 0000000000000001 [ 87.048691] x11: 0000000000000000 x10: 00000000000009b0 x9 : ffff8000099731e0 [ 87.055829] x8 : ffff00001da1b180 x7 : 0000010000108100 x6 : ffff0000002ae590 [ 87.062968] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 [ 87.070106] x2 : ffff800000ca4000 x1 : 0000000000000040 x0 : 000000000071ff00 [ 87.077244] Call trace: [ 87.079687] iomap_read_reg+0x10/0x30 [m_can_platform] [ 87.084832] can_fill_info+0x108/0x524 [can_dev] [ 87.089477] rtnl_fill_ifinfo+0x844/0x11b0 [ 87.093578] rtnl_getlink+0x23c/0x424 [ 87.097239] rtnetlink_rcv_msg+0x130/0x3a0 [ 87.101334] netlink_rcv_skb+0x60/0x130 [ 87.105174] rtnetlink_rcv+0x18/0x2c [ 87.108755] netlink_unicast+0x2f0/0x360 [ 87.112677] netlink_sendmsg+0x1b0/0x420 [ 87.116600] __sys_sendto+0x138/0x174 [ 87.120265] __arm64_sys_sendto+0x28/0x3c [ 87.124275] invoke_syscall+0x48/0x114 [ 87.128024] el0_svc_common.constprop.0+0xd4/0xfc [ 87.132729] do_el0_svc+0x20/0x30 [ 87.136044] el0_svc+0x28/0xa0 [ 87.139100] el0t_64_sync_handler+0xbc/0x140 [ 87.143372] el0t_64_sync+0x18c/0x190
Complete logs:
Climate Chamber: KWP 120 Start Temperature: -29.2�C End Temperature: -28.3�C Measured Temperature: -29.2�C Shelf Temperature: -28.5�C Shelf Name: Shelf_33 Module Serial Number: 15313618 Module Location: Shelf 1, Carrier Board 5 Test duration: 157.60s Test Log ******** 22:12:35.84 13->14 Waited 60.00s 22:11:35.75 12->13 Set Reset Low 22:11:35.68 11->12 Power Off 22:11:35.62 5->11 Not found, time out: "login:" 22:10:05.48 4->5 Message found: "Starting kernel" 22:10:00.04 3->4 Message found: "U-Boot" 22:09:59.93 2->3 Waited 1.00s 22:09:58.79 1->2 Set Reset High 22:09:58.68 0->1 Power On Search Strings ************** PASS : U-Boot PASS : Less than 64MB RAM detected PASS : Booting from mmc failed! PASS : Starting kernel PASS : mmcblk0: mmc0 PASS : cut here FAIL : rcu: INFO: rcu_preempt detected PASS : rcu: INFO: rcu_preempt self-detected stall PASS : Internal error PASS : I/O error FAIL : login: FAIL : I2C test, TestResult: PASS FAIL : RTC test, TestResult: PASS FAIL : Audio test, TestResult: PASS FAIL : Wifi test, TestResult: PASS FAIL : Bluetooth test, TestResult: PASS FAIL : CPU stress test, TestResult: PASS PASS : critical temperature reached FAIL : Ethernet test, TestResult: PASS FAIL : connected with FAIL : RAM test, TestResult: PASS PASS : memtester failed FAIL : memtester version PASS : FAILURE PASS : running CQE recovery FAIL : eMMC Nand test, TestResult: PASS PASS : bonnie\+\+ failed FAIL : Waiting for power-cycle 0 : OAK ERROR 1 : UART ERROR OK : registered as rtc0 OK : registered as rtc1 OK : xception stack N/A : Device life time estimation type B N/A : Pre EOL information 2 : USB hub found 0 : xception stack PASS : page allocation failure PASS : hwclock Terminal ******** � U-Boot SPL 2024.04-00035-gfc942d8282-dirty (Apr 16 2024 - 11:52:32 +0200) SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') SPL initial stack usage: 13368 bytes Trying to boot from MMC1 Authentication passed Authentication passed Authentication passed Authentication passed Authentication passed Starting ATF on ARM64 core... NOTICE: BL31: v2.10.0 (release):v2.10.0-340-g4da4a1a61 NOTICE: BL31: Built : 11:30:01, Feb 8 2024 I/TC: I/TC: OP-TEE version: 4.1.0-71-g439c5ecbb (gcc version 12.3.1 20230626 (Arm GNU Toolchain 12.3.Rel1 (Build arm-12.35))) #5 Fri Feb 23 13:00:52 UTC 2024 aarch64 I/TC: WARNING: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: GIC redistributor base address not provided I/TC: Assuming default GIC group status and modifier I/TC: SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') I/TC: HUK Initialized I/TC: Primary CPU switching to normal world boot U-Boot SPL 2024.04-00035-gfc942d8282-dirty (Apr 16 2024 - 11:47:25 +0200) SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') SPL initial stack usage: 1840 bytes Trying to boot from MMC1 Authentication passed Authentication passed U-Boot 2024.04-00035-gfc942d8282-dirty (Apr 16 2024 - 11:47:25 +0200) SoC: AM62X SR1.0 HS-FS DRAM: 512 MiB Core: 138 devices, 29 uclasses, devicetree: separate MMC: mmc@fa10000: 0, mmc@fa00000: 1 Loading Environment from MMC... OK MISSING TORADEX CARRIER CONFIG BLOCKS In: serial@2800000 Out: serial@2800000 Err: serial@2800000 Model: Toradex 0072 Verdin AM62 Solo 512MB WB IT V1.1B Serial#: 15313618 am65_cpsw_nuss ethernet@8000000: K3 CPSW: nuss_ver: 0x6BA01103 cpsw_ver: 0x6BA81103 ale_ver: 0x00290105 Ports:2 mdio_freq:1000000 Setting variant to wifi Net: Warning: ethernet@8000000port@1 MAC addresses don't match: Address in ROM is 64:1c:10:2a:76:c6 Address in environment is 00:14:2d:e9:aa:d2 eth0: ethernet@8000000port@1 [PRIME]Could not get PHY for ethernet@8000000port@1: addr 7 am65_cpsw_nuss_port ethernet@8000000port@2: phy_connect() failed Hit any key to stop autoboot: 1 0 MMC: no card present switch to partitions #0, OK mmc0(part 0) is current device Scanning mmc 0:1... Found U-Boot script /boot.scr 6003 bytes read in 15 ms (390.6 KiB/s) ## Executing script at 90280000 Loading DeviceTree: k3-am625-verdin-wifi-dev.dtb 70049 bytes read in 16 ms (4.2 MiB/s) 82 bytes read in 14 ms (4.9 KiB/s) Working FDT set to 90200000 Applying Overlay: verdin-am62_dsi-to-hdmi_overlay.dtbo 3050 bytes read in 15 ms (198.2 KiB/s) Applying Overlay: verdin-am62_spidev_overlay.dtbo 560 bytes read in 15 ms (36.1 KiB/s) 7861931 bytes read in 76 ms (98.7 MiB/s) Bootargs: root=PARTUUID=f360aa55-02 ro rootwait console=tty1 console=ttyS2,115200 consoleblank=0 earlycon=ns16550a,mmio32,0x02800000 Uncompressing Kernel Image to 0 ## Flattened Device Tree blob at 90200000 Booting using the fdt blob at 0x90200000 Working FDT set to 90200000 ERROR: reserving fdt memory region failed (addr=9e780000 size=80000 flags=4) ERROR: reserving fdt memory region failed (addr=9e800000 size=1800000 flags=4) ERROR: reserving fdt memory region failed (addr=9db00000 size=c00000 flags=4) Loading Device Tree to 0000000098ed5000, end 0000000098f09fff ... OK Working FDT set to 98ed5000 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 6.1.80+git.0d9f1748ac17 (oe-user@oe-host) (aarch64-tdx-linux-gcc (GCC) 11.4.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT Thu Mar 28 13:48:11 UTC 2024 [ 0.000000] Machine model: Toradex Verdin AM62 WB on Verdin Development Board [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '') [ 0.000000] printk: bootconsole [ns16550a0] enabled [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009db00000, size 12 MiB [ 0.000000] OF: reserved mem: initialized node r5f-memory@9db00000, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x000000009fffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009dafffff] [ 0.000000] node 0: [mem 0x000000009db00000-0x000000009e6fffff] [ 0.000000] node 0: [mem 0x000000009e700000-0x000000009e77ffff] [ 0.000000] node 0: [mem 0x000000009e780000-0x000000009fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000009fffffff] [ 0.000000] cma: Reserved 128 MiB at 0x0000000090e00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.4 [ 0.000000] percpu: Embedded 20 pages/cpu s41064 r8192 d32664 u81920 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: ARM erratum 845719 [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129024 [ 0.000000] Kernel command line: root=PARTUUID=f360aa55-02 ro rootwait console=tty1 console=ttyS2,115200 consoleblank=0 earlycon=ns16550a,mmio32,0x02800000 [ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 326452K/524288K available (11072K kernel code, 1354K rwdata, 3784K rodata, 2176K init, 422K bss, 66764K reserved, 131072K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=1. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 256 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv3: GICv3 features: 16 PPIs [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001880000 [ 0.000000] ITS [mem 0x01820000-0x0182ffff] [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS [ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19 [ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @80800000 (flat, esz 8, psz 64K, shr 0) [ 0.000000] ITS: using cache flushing for cmd queue [ 0.000000] GICv3: using LPI property table @0x0000000080030000 [ 0.000000] GIC: using cache flushing for LPI property table [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000080040000 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns [ 0.000001] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns [ 0.008741] Console: colour dummy device 80x25 [ 0.013998] printk: console [tty1] enabled [ 0.018258] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=800000) [ 0.028968] pid_max: default: 32768 minimum: 301 [ 0.033771] LSM: Security Framework initializing [ 0.038658] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.046167] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.056427] cblist_init_generic: Setting adjustable number of callback queues. [ 0.063928] cblist_init_generic: Setting shift to 0 and lim to 1. [ 0.070273] cblist_init_generic: Setting adjustable number of callback queues. [ 0.077696] cblist_init_generic: Setting shift to 0 and lim to 1. [ 0.084180] rcu: Hierarchical SRCU implementation. [ 0.089112] rcu: Max phase no-delay instances is 1000. [ 0.095333] Platform MSI: msi-controller@1820000 domain created [ 0.102075] EFI services will not be available. [ 0.106997] smp: Bringing up secondary CPUs ... [ 0.111667] smp: Brought up 1 node, 1 CPU [ 0.115785] SMP: Total of 1 processors activated. [ 0.120617] CPU features: detected: 32-bit EL0 Support [ 0.125892] CPU features: detected: CRC32 instructions [ 0.131247] CPU: All CPU(s) started at EL2 [ 0.135451] alternatives: applying system-wide alternatives [ 0.142834] devtmpfs: initialized [ 0.158651] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.168727] futex hash table entries: 256 (order: 2, 16384 bytes, linear) [ 0.182721] pinctrl core: initialized pinctrl subsystem [ 0.189133] DMI not present or invalid. [ 0.194026] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.201430] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations [ 0.208807] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.216851] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.225077] audit: initializing netlink subsys (disabled) [ 0.231398] thermal_sys: Registered thermal governor 'step_wise' [ 0.231411] thermal_sys: Registered thermal governor 'power_allocator' [ 0.237604] audit: type=2000 audit(0.148:1): state=initialized audit_enabled=0 res=1 [ 0.252296] cpuidle: using governor menu [ 0.256580] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.263608] ASID allocator initialised with 65536 entries [ 0.290281] KASLR disabled due to lack of seed [ 0.303826] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.310960] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [ 0.317395] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [ 0.324354] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [ 0.330781] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.337739] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [ 0.344165] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [ 0.351122] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [ 0.359487] k3-chipinfo 43000014.chipid: Family:AM62X rev:SR1.0 JTAGID[0x0bb7e02f] Detected [ 0.369941] iommu: Default domain type: Translated [ 0.375013] iommu: DMA domain TLB invalidation policy: strict mode [ 0.381818] SCSI subsystem initialized [ 0.386153] usbcore: registered new interface driver usbfs [ 0.391852] usbcore: registered new interface driver hub [ 0.397333] usbcore: registered new device driver usb [ 0.403190] pps_core: LinuxPPS API ver. 1 registered [ 0.408292] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.417668] PTP clock support registered [ 0.421892] EDAC MC: Ver: 3.0.0 [ 0.426568] FPGA manager framework [ 0.430217] Advanced Linux Sound Architecture Driver Initialized. [ 0.437814] clocksource: Switched to clocksource arch_sys_counter [ 0.444498] VFS: Disk quotas dquot_6.6.0 [ 0.448589] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.463527] NET: Registered PF_INET protocol family [ 0.469038] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.477741] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.486421] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.494378] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.502365] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.509964] TCP: Hash tables configured (established 4096 bind 4096) [ 0.516621] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.523343] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.530665] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.537040] RPC: Registered named UNIX socket transport module. [ 0.543174] RPC: Registered udp transport module. [ 0.548003] RPC: Registered tcp transport module. [ 0.552828] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.559439] NET: Registered PF_XDP protocol family [ 0.565276] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 0.576109] Initialise system trusted keyrings [ 0.581058] workingset: timestamp_bits=46 max_order=17 bucket_order=0 [ 0.594210] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.601028] NFS: Registering the id_resolver key type [ 0.606329] Key type id_resolver registered [ 0.610625] Key type id_legacy registered [ 0.614824] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.621702] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.685005] Key type asymmetric registered [ 0.689221] Asymmetric key parser 'x509' registered [ 0.694341] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 0.702143] io scheduler mq-deadline registered [ 0.706816] io scheduler kyber registered [ 0.716168] pinctrl-single 4084000.pinctrl: 34 pins, size 136 [ 0.723664] pinctrl-single f4000.pinctrl: 171 pins, size 684 [ 0.739628] Serial: 8250/16550 driver, 6 ports, IRQ sharing enabled [ 0.759811] brd: module loaded [ 0.768904] loop: module loaded [ 0.777614] tun: Universal TUN/TAP device driver, 1.6 [ 0.784036] VFIO - User Level meta-driver version: 0.3 [ 0.790746] usbcore: registered new interface driver usb-storage [ 0.797906] i2c_dev: i2c /dev entries driver [ 0.805040] sdhci: Secure Digital Host Controller Interface driver [ 0.811447] sdhci: Copyright(c) Pierre Ossman [ 0.816361] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.823008] ledtrig-cpu: registered to indicate activity on CPUs [ 0.829415] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... [ 0.836562] usbcore: registered new interface driver usbhid [ 0.842285] usbhid: USB HID core driver [ 0.847709] optee: probing for conduit method. I/TC: Reserved shared memory is enabled I/TC: Dynamic shared memory is enabled I/TC: Normal World virtualization support is disabled I/TC: Asynchronous notifications are disabled [ 0.852348] optee: revision 4.1 (439c5ecb) [ 0.869055] optee: dynamic shared memory is enabled [ 0.878624] optee: initialized driver [ 0.884857] Initializing XFRM netlink socket [ 0.889476] NET: Registered PF_PACKET protocol family [ 0.894803] Key type dns_resolver registered [ 0.899734] registered taskstats version 1 [ 0.903977] Loading compiled-in X.509 certificates [ 0.923699] ti-sci 44043000.system-controller: ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [ 1.015166] omap_i2c 4900000.i2c: bus 3 rev0.12 at 100 kHz [ 1.023018] i2c 0-0030: Fixed dependency cycle(s) with /bus@f0000/i2c@20000000/pmic@30/regulators/buck2 [ 1.064072] input: tps65219-pwrbutton as /devices/platform/bus@f0000/20000000.i2c/i2c-0/0-0030/tps65219-pwrbutton.2.auto/input/input0 [ 1.078851] rtc-ds1307 0-0032: oscillator failed, set time! [ 1.084853] rtc-ds1307 0-0032: registered as rtc0 [ 1.089861] rtc-ds1307 0-0032: hctosys: unable to read the hardware clock [ 1.099624] at24 0-0050: supply vcc not found, using dummy regulator [ 1.106713] at24 0-0050: 256 byte 24c02 EEPROM, writable, 16 bytes/write [ 1.113668] omap_i2c 20000000.i2c: bus 0 rev0.12 at 400 kHz [ 1.122378] pca953x 1-0021: supply vcc not found, using dummy regulator [ 1.129424] pca953x 1-0021: using no AI [ 1.153963] pca953x 1-0021: failed writing register [ 1.159208] pca953x: probe of 1-0021 failed with error -121 [ 1.165743] at24 1-0057: supply vcc not found, using dummy regulator [ 1.173087] at24 1-0057: 256 byte 24c02 EEPROM, writable, 16 bytes/write [ 1.180058] omap_i2c 20010000.i2c: bus 1 rev0.12 at 100 kHz [ 1.187228] omap_i2c 20020000.i2c: bus 2 rev0.12 at 100 kHz [ 1.194156] omap_i2c 20030000.i2c: bus 4 rev0.12 at 100 kHz [ 1.200251] ti-sci-intr 4210000.interrupt-controller: Interrupt Router 5 domain created [ 1.208680] ti-sci-intr bus@f0000:interrupt-controller@a00000: Interrupt Router 3 domain created [ 1.218050] ti-sci-inta 48000000.interrupt-controller: Interrupt Aggregator domain 28 created [ 1.231961] ti-udma 485c0100.dma-controller: Number of rings: 82 [ 1.241098] ti-udma 485c0100.dma-controller: Channels: 48 (bchan: 18, tchan: 12, rchan: 18) [ 1.253263] ti-udma 485c0000.dma-controller: Number of rings: 150 [ 1.264895] ti-udma 485c0000.dma-controller: Channels: 35 (tchan: 20, rchan: 15) [ 1.276269] 4a00000.serial: ttyS3 at MMIO 0x4a00000 (irq = 291, base_baud = 3000000) is a 8250 [ 1.286834] 2800000.serial: ttyS2 at MMIO 0x2800000 (irq = 292, base_baud = 3000000) is a 8250 [ 1.295832] printk: console [ttyS2] enabled [ 1.295832] printk: console [ttyS2] enabled [ 1.304335] printk: bootconsole [ns16550a0] disabled [ 1.304335] printk: bootconsole [ns16550a0] disabled [ 1.315862] 2810000.serial: ttyS0 at MMIO 0x2810000 (irq = 293, base_baud = 3000000) is a 8250 [ 1.325583] omap8250 2850000.serial: PM domain pd:156 will not be powered off [ 1.333146] 2850000.serial: ttyS4 at MMIO 0x2850000 (irq = 294, base_baud = 3000000) is a 8250 [ 1.341983] serial serial0: tty port ttyS4 registered [ 1.348868] davinci_mdio 8000f00.mdio: Configuring MDIO in manual mode [ 1.393827] davinci_mdio 8000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 [ 1.402951] am65-cpsw-nuss 8000000.ethernet: initializing am65 cpsw nuss version 0x6BA01103, cpsw version 0x6BA81103 Ports: 3 quirks:00000006 [ 1.416017] am65-cpsw-nuss 8000000.ethernet: initialized cpsw ale version 1.5 [ 1.423205] am65-cpsw-nuss 8000000.ethernet: ALE Table size 512 [ 1.430149] am65-cpsw-nuss 8000000.ethernet: CPTS ver 0x4e8a010c, freq:500000000, add_val:1 pps:0 [ 1.440812] am65-cpsw-nuss 8000000.ethernet: set new flow-id-base 19 [ 1.458918] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller [ 1.464520] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 1 [ 1.472354] xhci-hcd xhci-hcd.3.auto: USB3 root hub has no ports [ 1.478380] xhci-hcd xhci-hcd.3.auto: hcc params 0x0258fe6d hci version 0x110 quirks 0x0000008020010010 [ 1.487875] xhci-hcd xhci-hcd.3.auto: irq 299, io mem 0x31100000 [ 1.495008] hub 1-0:1.0: USB hub found [ 1.498876] hub 1-0:1.0: 1 port detected [ 1.635583] mmc0: CQHCI version 5.10 [ 1.642498] gpio-488 (PCIE_1_RESET#): hogged as output/low [ 1.650560] gpio-427 (CTRL_SLEEP_MOCI#): hogged as output/high [ 1.667963] davinci_mdio 8000f00.mdio: Configuring MDIO in manual mode [ 1.687190] mmc0: SDHCI controller on fa10000.mmc [fa10000.mmc] using ADMA 64-bit [ 1.713815] davinci_mdio 8000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 [ 1.726778] mdio_bus 8000f00.mdio: MDIO device at address 7 is missing. [ 1.733476] davinci_mdio 8000f00.mdio: phy[0]: device 8000f00.mdio:00, driver TI DP83867 [ 1.745358] sdhci-am654 fa00000.mmc: Got CD GPIO [ 1.751185] sdhci-am654 fa20000.mmc: allocated mmc-pwrseq [ 1.757925] debugfs: Directory 'pd:182' with parent 'pm_genpd' already present! [ 1.766019] mmc1: CQHCI version 5.10 [ 1.769949] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 1.776786] mmc2: CQHCI version 5.10 [ 1.787674] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.794814] mmc0: Command Queue Engine enabled [ 1.799325] mmc0: new HS200 MMC card at address 0001 [ 1.807267] mmcblk0: mmc0:0001 M04A11 3.64 GiB [ 1.815734] mmcblk0: p1 p2 [ 1.820300] mmcblk0boot0: mmc0:0001 M04A11 4.00 MiB [ 1.827956] mmcblk0boot1: mmc0:0001 M04A11 4.00 MiB [ 1.833042] mmc2: SDHCI controller on fa20000.mmc [fa20000.mmc] using ADMA 64-bit [ 1.842782] mmc1: SDHCI controller on fa00000.mmc [fa00000.mmc] using ADMA 64-bit [ 1.850985] mmcblk0rpmb: mmc0:0001 M04A11 4.00 MiB, chardev (241:0) [ 1.857436] ALSA device list: [ 1.861226] No soundcards found. [ 1.872204] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [ 1.879658] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 1.917200] mmc2: new ultra high speed DDR50 SDIO card at address 0001 [ 1.929960] EXT4-fs (mmcblk0p2): recovery complete [ 1.939642] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [ 1.948436] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 1.957168] devtmpfs: mounted [ 1.961742] Freeing unused kernel memory: 2176K [ 1.966514] Run /sbin/init as init process [ 2.006634] hub 1-1:1.0: USB hub found [ 2.011231] hub 1-1:1.0: 4 ports detected [ 2.102682] systemd[1]: System time before build time, advancing clock. [ 2.149156] NET: Registered PF_INET6 protocol family [ 2.155807] Segment Routing with IPv6 [ 2.159737] In-situ OAM (IOAM) with IPv6 [ 2.188938] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid) [ 2.221111] systemd[1]: Detected architecture arm64. Welcome to [1mTDX Wayland with XWayland 6.6.0+build.12 (kirkstone)[0m! [ 2.271706] systemd[1]: Hostname set to <verdin-am62-15313618>. [ 2.357979] usb 1-1.4: new high-speed USB device number 3 using xhci-hcd [ 2.894162] systemd[1]: Queued start job for default target Graphical Interface. [ 2.953744] systemd[1]: Created slice Slice /system/getty. [[0;32m OK [0m] Created slice [0;1;39mSlice /system/getty[0m. [ 2.976737] systemd[1]: Created slice Slice /system/modprobe. [[0;32m OK [0m] Created slice [0;1;39mSlice /system/modprobe[0m. [ 3.000622] systemd[1]: Created slice Slice /system/serial-getty. [[0;32m OK [0m] Created slice [0;1;39mSlice /system/serial-getty[0m. [ 3.024175] systemd[1]: Created slice User and Session Slice. [[0;32m OK [0m] Created slice [0;1;39mUser and Session Slice[0m. [ 3.046545] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [[0;32m OK [0m] Started [0;1;39mDispatch Password …ts to Console Directory Watch[0m. [ 3.070547] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [[0;32m OK [0m] Started [0;1;39mForward Password R…uests to Wall Directory Watch[0m. [ 3.094609] systemd[1]: Reached target Host and Network Name Lookups. [[0;32m OK [0m] Reached target [0;1;39mHost and Network Name Lookups[0m. [ 3.118055] systemd[1]: Reached target Path Units. [[0;32m OK [0m] Reached target [0;1;39mPath Units[0m. [ 3.138407] systemd[1]: Reached target Remote File Systems. [[0;32m OK [0m] Reached target [0;1;39mRemote File Systems[0m. [ 3.162210] systemd[1]: Reached target Slice Units. [[0;32m OK [0m] Reached target [0;1;39mSlice Units[0m. [ 3.182196] systemd[1]: Reached target Swaps. [[0;32m OK [0m] Reached target [0;1;39mSwaps[0m. [ 3.244264] systemd[1]: Listening on RPCbind Server Activation Socket. [[0;32m OK [0m] Listening on [0;1;39mRPCbind Server Activation Socket[0m. [ 3.266502] systemd[1]: Reached target RPC Port Mapper. [[0;32m OK [0m] Reached target [0;1;39mRPC Port Mapper[0m. [ 3.291812] systemd[1]: Listening on Syslog Socket. [[0;32m OK [0m] Listening on [0;1;39mSyslog Socket[0m. [ 3.314946] systemd[1]: Listening on initctl Compatibility Named Pipe. [[0;32m OK [0m] Listening on [0;1;39minitctl Compatibility Named Pipe[0m. [ 3.340011] systemd[1]: Listening on Journal Audit Socket. [[0;32m OK [0m] Listening on [0;1;39mJournal Audit Socket[0m. [ 3.363293] systemd[1]: Listening on Journal Socket (/dev/log). [[0;32m OK [0m] Listening on [0;1;39mJournal Socket (/dev/log)[0m. [ 3.387496] systemd[1]: Listening on Journal Socket. [[0;32m OK [0m] Listening on [0;1;39mJournal Socket[0m. [ 3.412464] systemd[1]: Listening on Network Service Netlink Socket. [[0;32m OK [0m] Listening on [0;1;39mNetwork Service Netlink Socket[0m. [ 3.436099] systemd[1]: Listening on udev Control Socket. [[0;32m OK [0m] Listening on [0;1;39mudev Control Socket[0m. [ 3.459534] systemd[1]: Listening on udev Kernel Socket. [[0;32m OK [0m] Listening on [0;1;39mudev Kernel Socket[0m. [ 3.485090] systemd[1]: Listening on User Database Manager Socket. [[0;32m OK [0m] Listening on [0;1;39mUser Database Manager Socket[0m. [ 3.534563] systemd[1]: Mounting Huge Pages File System... Mounting [0;1;39mHuge Pages File System[0m... [ 3.574641] systemd[1]: Mounting POSIX Message Queue File System... Mounting [0;1;39mPOSIX Message Queue File System[0m... [ 3.618600] systemd[1]: Mounting Kernel Debug File System... Mounting [0;1;39mKernel Debug File System[0m... [ 3.637393] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing). [ 3.674808] systemd[1]: Mounting Temporary Directory /tmp... Mounting [0;1;39mTemporary Directory /tmp[0m... [ 3.722804] systemd[1]: Starting Create List of Static Device Nodes... Starting [0;1;39mCreate List of Static Device Nodes[0m... [ 3.770812] systemd[1]: Starting Load Kernel Module configfs... Starting [0;1;39mLoad Kernel Module configfs[0m... [ 3.818819] systemd[1]: Starting Load Kernel Module drm... Starting [0;1;39mLoad Kernel Module drm[0m... [ 3.855089] systemd[1]: Starting Load Kernel Module fuse... Starting [0;1;39mLoad Kernel Module fuse[0m... [ 3.880254] fuse: init (API version 7.37) [ 3.906760] systemd[1]: Starting RPC Bind... Starting [0;1;39mRPC Bind[0m... [ 3.945471] systemd[1]: Starting File System Check on Root Device... Starting [0;1;39mFile System Check on Root Device[0m... [ 3.999047] systemd[1]: Starting Journal Service... Starting [0;1;39mJournal Service[0m... [ 4.055247] systemd[1]: Starting Load Kernel Modules... Starting [0;1;39mLoad Kernel Modules[0m... [ 4.108670] systemd[1]: Starting Generate network units from Kernel command line... Starting [0;1;39mGenerate network …ts from Kernel command line[0m... [ 4.174316] systemd[1]: Starting Coldplug All udev Devices... Starting [0;1;39mColdplug All udev Devices[0m... [ 4.252030] systemd[1]: Started RPC Bind. [[0;32m OK [0m] Started [0;1;39mRPC Bind[0m. [ 4.291107] systemd[1]: Mounted Huge Pages File System. [[0;32m OK [0m] Mounted [0;1;39mHuge Pages File System[0m. [ 4.323111] systemd[1]: Mounted POSIX Message Queue File System. [[0;32m OK [0m] Mounted [0;1;39mPOSIX Message Queue File System[0m. [ 4.359027] systemd[1]: Mounted Kernel Debug File System. [[0;32m OK [0m] Mounted [0;1;39mKernel Debug File System[0m. [ 4.391037] systemd[1]: Mounted Temporary Directory /tmp. [[0;32m OK [0m] Mounted [0;1;39mTemporary Directory /tmp[0m. [ 4.424539] systemd[1]: Finished Create List of Static Device Nodes. [[0;32m OK [0m] Finished [0;1;39mCreate List of Static Device Nodes[0m. [ 4.463771] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 4.490396] systemd[1]: Finished Load Kernel Module configfs. [[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module configfs[0m. [ 4.527063] systemd[1]: Started Journal Service. [[0;32m OK [0m] Started [0;1;39mJournal Service[0m. [[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module drm[0m. [[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module fuse[0m. [[0;32m OK [0m] Finished [0;1;39mFile System Check on Root Device[0m. [[0;32m OK [0m] Finished [0;1;39mLoad Kernel Modules[0m. [[0;32m OK [0m] Finished [0;1;39mGenerate network units from Kernel command line[0m. Mounting [0;1;39mFUSE Control File System[0m... Mounting [0;1;39mKernel Configuration File System[0m... Starting [0;1;39mRemount Root and Kernel File Systems[0m... Starting [0;1;39mApply Kernel Variables[0m... [[0;32m OK [0m] Mounted [0;1;39mFUSE Control File System[0m. [[0;32m OK [0m] Mounted [0;1;39mKernel Configuration File System[0m. [[0;32m OK [0m] Finished [0;1;39mApply Kernel Variables[0m. [ 4.986677] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. [[0;32m OK [0m] Finished [0;1;39mRemount Root and Kernel File Systems[0m. Starting [0;1;39mFlush Journal to Persistent Storage[0m... Starting [0;1;39mCreate Static Device Nodes in /dev[0m... [ 5.122533] systemd-journald[154]: Received client request to flush runtime journal. [[0;32m OK [0m] Finished [0;1;39mFlush Journal to Persistent Storage[0m. [[0;32m OK [0m] Finished [0;1;39mCreate Static Device Nodes in /dev[0m. [[0;32m OK [0m] Reached target [0;1;39mPreparation for Local File Systems[0m. Mounting [0;1;39m/var/volatile[0m... [ 5.300098] audit: type=1334 audit(1651167748.196:2): prog-id=5 op=LOAD [ 5.325154] audit: type=1334 audit(1651167748.208:3): prog-id=6 op=LOAD Starting [0;1;39mRule-based Manage…for Device Events and Files[0m... [[0;32m OK [0m] Mounted [0;1;39m/var/volatile[0m. Starting [0;1;39mLoad/Save Random Seed[0m... [[0;32m OK [0m] Reached target [0;1;39mLocal File Systems[0m. Starting [0;1;39mCreate Volatile Files and Directories[0m... [[0;32m OK [0m] Finished [0;1;39mCreate Volatile Files and Directories[0m. Starting [0;1;39mNetwork Time Synchronization[0m... Starting [0;1;39mRecord System Boot/Shutdown in UTMP[0m... [[0;32m OK [0m] Started [0;1;39mRule-based Manager for Device Events and Files[0m. [[0;32m OK [0m] Finished [0;1;39mRecord System Boot/Shutdown in UTMP[0m. [[0;32m OK [0m] Finished [0;1;39mColdplug All udev Devices[0m. Starting [0;1;39mWait for udev To …plete Device Initialization[0m... [ 6.449919] random: crng init done [[0;32m OK [0m] Finished [0;1;39mLoad/Save Random Seed[0m. [[0;32m OK [0m] Started [0;1;39mNetwork Time Synchronizatio[ 6.945149] systemd-journald[154]: Oldest entry in /run/log/journal/98d6394cd75d4f2dad68076443517daa/system.journal is older than the configured file retention duration (1month), suggesting rotation. n[0m. [[0;32m OK [0m] Reached target [0;1;39mSystem Time Set[0m. [ 7.020112] systemd-journald[154]: /run/log/journal/98d6394cd75d4f2dad68076443517daa/system.journal: Journal header limits reached or header out-of-date, rotating. [ 7.521756] lm75 0-0048: supply vs not found, using dummy regulator [ 7.541716] omap8250 2b300000.serial: No clock speed specified: using default: 48000000 [ 7.575821] 2b300000.serial: ttyS1 at MMIO 0x2b300000 (irq = 485, base_baud = 3000000) is a 8250 [ 7.631547] hwmon hwmon1: temp1_input not attached to any thermal zone [ 7.656301] ina2xx 1-0040: error configuring the device: -121 [ 7.665554] nau8822 1-001a: Failed to issue reset: -121 [ 7.707843] lm75 0-0048: hwmon1: sensor 'tmp1075' [ 7.721699] nau8822: probe of 1-001a failed with error -121 [ 7.744113] CAN device driver interface [ 7.766785] lm75 1-004f: supply vs not found, using dummy regulator [ 7.853274] hwmon hwmon2: temp1_input not attached to any thermal zone [ 7.866875] m_can_platform 4e08000.can: m_can device registered (irq=0, version=32) [ 7.929951] lm75 1-004f: hwmon2: sensor 'tmp75c' [[0;32m OK [0m] Found device [0;1;39m/dev/ttyS2[0m. [ 7.970693] m_can_platform 20701000.can: m_can device registered (irq=487, version=32) [ 8.333694] Bluetooth: Core ver 2.22 [ 8.373929] k3-m4-rproc 5000000.m4fss: device does not reserved memory regions, ret = -22 [ 8.423953] NET: Registered PF_BLUETOOTH protocol family [ 8.471681] k3-m4-rproc 5000000.m4fss: reserved memory init failed, ret = -22 [ 8.492952] Bluetooth: HCI device and connection manager initialized [ 8.547050] remoteproc remoteproc0: releasing 5000000.m4fss [ 8.555637] Bluetooth: HCI socket layer initialized [ 8.611257] Bluetooth: L2CAP socket layer initialized [ 8.616886] k3-m4-rproc: probe of 5000000.m4fss failed with error -22 [ 8.686371] Bluetooth: SCO socket layer initialized [ 8.818317] rtc-ti-k3 2b1f0000.rtc: registered as rtc1 [ 8.858490] platform 78000000.r5f: R5F core may have been powered on by a different host, programmed state (0) != actual state (1) [ 9.037121] platform 78000000.r5f: configured R5F for IPC-only mode [ 9.117604] platform 78000000.r5f: device does not have reserved memory regions, ret = -22 [ 9.139396] lt8912 1-0048: supply vdd not found, using dummy regulator [ 9.150509] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 9.158689] lt8912 1-0048: supply vccmipirx not found, using dummy regulator [ 9.168500] lt8912 1-0048: supply vccsysclk not found, using dummy regulator [ 9.185702] lt8912 1-0048: supply vcclvdstx not found, using dummy regulator [ 9.202141] lt8912 1-0048: supply vcchdmitx not found, using dummy regulator [ 9.218109] lt8912 1-0048: supply vcclvdspll not found, using dummy regulator [ 9.234095] lt8912 1-0048: supply vcchdmipll not found, using dummy regulator [ 9.273170] k3_r5_rproc bus@f0000:bus@b00000:r5fss@78000000: reserved memory init failed, ret = -22 [ 9.291153] [drm] Initialized tidss 1.0.0 20180215 for 30200000.dss on minor 0 [ 9.306164] tidss 30200000.dss: [drm] Cannot find any crtc or sizes [ 9.326420] tidss 30200000.dss: [drm] Cannot find any crtc or sizes [ 9.363223] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 9.408365] remoteproc remoteproc0: releasing 78000000.r5f [ 9.437554] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 9.456495] k3_r5_rproc bus@f0000:bus@b00000:r5fss@78000000: k3_r5_cluster_rproc_init failed, ret = -22 [ 9.582017] k3_r5_rproc: probe of bus@f0000:bus@b00000:r5fss@78000000 failed with error -22 [ 10.061498] mwifiex_sdio mmc2:0001:1: info: FW download over, size 570976 bytes [[0m[0;31m* [0m] A start job is running for Wait for…ice Initialization (2s / 2min 57s) [ 11.477920] mwifiex_sdio mmc2:0001:1: WLAN FW is active [ 11.531305] mwifiex_sdio mmc2:0001:1: Unknown api_id: 5 [ 11.575400] mwifiex_sdio mmc2:0001:1: info: MWIFIEX VERSION: mwifiex 1.0 (16.92.21.p84) [ 11.589950] mwifiex_sdio mmc2:0001:1: driver_version = mwifiex 1.0 (16.92.21.p84) M [K[[0;1;31m*[0m[0;31m* [0m] A start job is running for Wait for…ice Initialization (2s / 2min 57s) M [K[[0;31m*[0;1;31m*[0m[0;31m* [0m] A start job is running for Wait for…ice Initialization (3s / 2min 57s) M [K[ [0;31m*[0;1;31m*[0m[0;31m* [0m] A start job is running for Wait for…ice Initialization (3s / 2min 57s) M [K[ [0;31m*[0;1;31m*[0m[0;31m* [0m] A start job is running for Wait for…ice Initialization (4s / 2min 57s) M [K[ [0;31m*[0;1;31m*[0m[0;31m*[0m] A start job is running for Wait for…ice Initialization (4s / 2min 57s) [ 86.779029] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: [ 86.785173] rcu: Tasks blocked on level-0 rcu_node (CPUs 0-0): P186/1:b..l [ 86.792151] (detected by 0, t=18276 jiffies, g=6889, q=115 ncpus=1) [ 86.798506] task:systemd-udevd state:R running task stack:0 pid:186 ppid:173 flags:0x00000a04 [ 86.808424] Call trace: [ 86.810870] __switch_to+0xd4/0x130 [ 86.814374] __schedule+0x230/0x664 [ 86.817863] preempt_schedule_irq+0x44/0xd0 [ 86.822047] el1_interrupt+0x4c/0x70 [ 86.825626] el1h_64_irq_handler+0x18/0x2c [ 86.829725] el1h_64_irq+0x64/0x68 [ 86.833130] set_root+0x64/0xfc [ 86.836275] nd_jump_root+0xb8/0xf0 [ 86.839764] path_init+0x2d0/0x380 [ 86.843167] path_parentat+0x20/0xb0 [ 86.846743] __filename_parentat+0xa4/0x1c0 [ 86.850927] do_unlinkat+0x68/0x270 [ 86.854416] __arm64_sys_unlinkat+0x40/0x84 [ 86.858600] invoke_syscall+0x48/0x114 [ 86.862352] el0_svc_common.constprop.0+0xd4/0xfc [ 86.867057] do_el0_svc+0x20/0x30 [ 86.870372] el0_svc+0x28/0xa0 [ 86.873428] el0t_64_sync_handler+0xbc/0x140 [ 86.877701] el0t_64_sync+0x18c/0x190 [ 86.881364] rcu: rcu_preempt kthread timer wakeup didn't happen for 18273 jiffies! g6889 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402 [ 86.892749] rcu: Possible timer handling issue on cpu=0 timer-softirq=2071 [ 86.899705] rcu: rcu_preempt kthread starved for 18274 jiffies! g6889 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402 ->cpu=0 [ 86.910136] rcu: Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior. [ 86.919260] rcu: RCU grace-period kthread stack dump: [ 86.924305] task:rcu_preempt state:I stack:0 pid:14 ppid:2 flags:0x00000008 [ 86.932656] Call trace: [ 86.935099] __switch_to+0xd4/0x130 [ 86.938587] __schedule+0x230/0x664 [ 86.942074] schedule+0x5c/0xcc [ 86.945216] schedule_timeout+0x84/0xfc [ 86.949055] rcu_gp_fqs_loop+0x12c/0x46c [ 86.952983] rcu_gp_kthread+0x128/0x164 [ 86.956820] kthread+0x10c/0x110 [ 86.960051] ret_from_fork+0x10/0x20 [ 86.963627] rcu: Stack dump where RCU GP kthread last ran: [ 86.969111] CPU: 0 PID: 181 Comm: systemd-udevd Not tainted 6.1.80+git.0d9f1748ac17 #1 [ 86.977026] Hardware name: Toradex Verdin AM62 WB on Verdin Development Board (DT) [ 86.984591] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 86.991550] pc : iomap_read_reg+0x10/0x30 [m_can_platform] [ 86.997049] lr : m_can_get_berr_counter+0x3c/0x10c [m_can] [ 87.002548] sp : ffff8000099735f0 [ 87.005858] x29: ffff8000099735f0 x28: 0000000000000240 x27: ffff800000cca1a0 [ 87.012998] x26: ffff000003f9e000 x25: ffff000003f9e240 x24: 0000000000000000 [ 87.020137] x23: 0000000000000000 x22: ffff0000002ae410 x21: ffff0000035f8000 [ 87.027276] x20: ffff0000035f8980 x19: ffff80000997362c x18: 0000000000000000 [ 87.034414] x17: ffff800014add000 x16: ffff800008000000 x15: 0000000000000000 [ 87.041552] x14: 000000000000022f x13: 0000000000000001 x12: 0000000000000001 [ 87.048691] x11: 0000000000000000 x10: 00000000000009b0 x9 : ffff8000099731e0 [ 87.055829] x8 : ffff00001da1b180 x7 : 0000010000108100 x6 : ffff0000002ae590 [ 87.062968] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 [ 87.070106] x2 : ffff800000ca4000 x1 : 0000000000000040 x0 : 000000000071ff00 [ 87.077244] Call trace: [ 87.079687] iomap_read_reg+0x10/0x30 [m_can_platform] [ 87.084832] can_fill_info+0x108/0x524 [can_dev] [ 87.089477] rtnl_fill_ifinfo+0x844/0x11b0 [ 87.093578] rtnl_getlink+0x23c/0x424 [ 87.097239] rtnetlink_rcv_msg+0x130/0x3a0 [ 87.101334] netlink_rcv_skb+0x60/0x130 [ 87.105174] rtnetlink_rcv+0x18/0x2c [ 87.108755] netlink_unicast+0x2f0/0x360 [ 87.112677] netlink_sendmsg+0x1b0/0x420 [ 87.116600] __sys_sendto+0x138/0x174 [ 87.120265] __arm64_sys_sendto+0x28/0x3c [ 87.124275] invoke_syscall+0x48/0x114 [ 87.128024] el0_svc_common.constprop.0+0xd4/0xfc [ 87.132729] do_el0_svc+0x20/0x30 [ 87.136044] el0_svc+0x28/0xa0 [ 87.139100] el0t_64_sync_handler+0xbc/0x140 [ 87.143372] el0t_64_sync+0x18c/0x190 M [K[ [0;31m*[0;1;31m*[0m] A start job is running for Wait for…itialization (1min 18s / 2min 57s) [ 87.171051] platform sound: deferred probe pending M [K[[0;32m OK [0m] Listening on [0;1;39mLoad/Save RF …itch Status /dev/rfkill Watch[0m. [K Starting [0;1;39mLoad/Save RF Kill Switch Status[0m... [[0;32m OK [0m] Started [0;1;39mLoad/Save RF Kill Switch Status[0m. [[0;32m OK [0m] Created slice [0;1;39mSlice /system/systemd-fsck[0m. [[0;32m OK [0m] Found device [0;1;39m/dev/mmcblk0p1[0m. [[0;32m OK [0m] Finished [0;1;39mWait for udev To Complete Device Initialization[0m. [ 88.788341] audit: type=1334 audit(1713384460.956:4): prog-id=7 op=LOAD [ 88.799379] audit: type=1334 audit(1713384460.968:5): prog-id=8 op=LOAD [[0;32m OK [0m] Started [0;1;39mHardware RNG Entropy Gatherer Daemon[0m. [[0;32m OK [0m] Reached target [0;1;39mSystem Initialization[0m. [[0;32m OK [0m] Started [0;1;39mLogs some system s…istics to the systemd journal[0m. [[0;32m OK [0m] Started [0;1;39mDaily Cleanup of Temporary Directories[0m. [[0;32m OK [0m] Reached target [0;1;39mTimer Units[0m. [[0;32m OK [0m] Listening on [0;1;39mAvahi mDNS/DNS-SD Stack Activation Socket[0m. [[0;32m OK [0m] Listening on [0;1;39mD-Bus System Message Bus Socket[0m. [[0;32m OK [0m] Listening on [0;1;39mdropbear.socket[0m. [[0;32m OK [0m] Listening on [0;1;39mGPS (Global P…ioning System) Daemon Sockets[0m. Starting [0;1;39mWeston socket[0m... Starting [0;1;39mFile System Check on /dev/mmcblk0p1[0m... [[0;32m OK [0m] Listening on [0;1;39mWeston socket[0m. [[0;32m OK [0m] Reached target [0;1;39mSocket Units[0m. [[0;32m OK [0m] Reached target [0;1;39mBasic System[0m. Starting [0;1;39mBluetooth service[0m... [[0;32m OK [0m] Started [0;1;39mKernel Logging Service[0m. [[0;32m OK [0m] Started [0;1;39mSystem Logging Service[0m. Starting [0;1;39mD-Bus System Message Bus[0m... Starting [0;1;39mshow continuously some info about the som[0m... Starting [0;1;39mIPv6 Packet Filtering Framework[0m... Starting [0;1;39mIPv4 Packet Filtering Framework[0m... Starting [0;1;39mTelephony service[0m... [ 89.645375] audit: type=1334 audit(1713384461.812:6): prog-id=9 op=LOAD [ 89.682739] audit: type=1334 audit(1713384461.824:7): prog-id=10 op=LOAD Starting [0;1;39mUser Login Management[0m... [[0;32m OK [0m] Started [0;1;39mstart the tests in climatic chamber[0m. [[0;32m OK [0m] Started [0;1;39mTimestamping service[0m. Starting [0;1;39mLoad default USB gadget schema g1.schema[0m... [[0;32m OK [0m] Started [0;1;39mD-Bus System Message Bus[0m. [ 90.069121] using random self ethernet address [ 90.101441] using random host ethernet address [[0;32m OK [0m] Finished [0;1;39mFile System Check on /dev/mmcblk0p1[0m. [[0;32m OK [0m] Finished [0;1;39mIPv6 Packet Filtering Framework[0m. [[0;32m OK [0m] Finished [0;1;39mIPv4 Packet Filtering Framework[0m. [[0;32m OK [0m] Reached target [0;1;39mPreparation for Network[0m. ***** UART ERROR **** UART Error Code: -1073807253 VISA Read in ModuleProcess.vi:1380011->ClimateChamberControl.viVISA Source: COM16 **********************
2. Boot stall without any message.
Log is attached, however from what I can tell there is no hint of what's going on
Climate Chamber: KWP 120
Start Temperature: -34.6�C
End Temperature: -35.5�C
Measured Temperature: -34.6�C
Shelf Temperature: -32.7�C
Shelf Name: Shelf_33
Module Serial Number: 15313618
Module Location: Shelf 1, Carrier Board 5
Test duration: 158.31s
Test Log
********
18:29:29.12 13->14 Waited 60.00s
18:28:28.90 12->13 Set Reset Low
18:28:28.79 11->12 Power Off
18:28:28.68 5->11 Not found, time out: "login:"
18:26:58.48 4->5 Message found: "Starting kernel"
18:26:52.46 3->4 Message found: "U-Boot"
18:26:52.45 2->3 Waited 1.00s
18:26:51.32 1->2 Set Reset High
18:26:51.24 0->1 Power On
Search Strings
**************
PASS : U-Boot
PASS : Less than 64MB RAM detected
PASS : Booting from mmc failed!
PASS : Starting kernel
PASS : mmcblk0: mmc0
PASS : cut here
PASS : rcu: INFO: rcu_preempt detected
PASS : rcu: INFO: rcu_preempt self-detected stall
PASS : Internal error
PASS : I/O error
FAIL : login:
FAIL : I2C test, TestResult: PASS
FAIL : RTC test, TestResult: PASS
FAIL : Audio test, TestResult: PASS
FAIL : Wifi test, TestResult: PASS
FAIL : Bluetooth test, TestResult: PASS
FAIL : CPU stress test, TestResult: PASS
PASS : critical temperature reached
FAIL : Ethernet test, TestResult: PASS
FAIL : connected with
FAIL : RAM test, TestResult: PASS
PASS : memtester failed
FAIL : memtester version
PASS : FAILURE
PASS : running CQE recovery
FAIL : eMMC Nand test, TestResult: PASS
PASS : bonnie\+\+ failed
FAIL : Waiting for power-cycle
0 : OAK ERROR
1 : UART ERROR
OK : registered as rtc0
OK : registered as rtc1
OK : xception stack
N/A : Device life time estimation type B
N/A : Pre EOL information
2 : USB hub found
0 : xception stack
PASS : page allocation failure
PASS : hwclock
Terminal
********
�
U-Boot SPL 2024.04-00035-gfc942d8282-dirty (Apr 16 2024 - 11:52:32 +0200)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)')
SPL initial stack usage: 13368 bytes
Trying to boot from MMC1
Authentication passed
Authentication passed
Authentication passed
Authentication passed
Authentication passed
Starting ATF on ARM64 core...
NOTICE: BL31: v2.10.0 (release):v2.10.0-340-g4da4a1a61
NOTICE: BL31: Built : 11:30:01, Feb 8 2024
I/TC:
I/TC: OP-TEE version: 4.1.0-71-g439c5ecbb (gcc version 12.3.1 20230626 (Arm GNU Toolchain 12.3.Rel1 (Build arm-12.35))) #5 Fri Feb 23 13:00:52 UTC 2024 aarch64
I/TC: WARNING: This OP-TEE configuration might be insecure!
I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html
I/TC: Primary CPU initializing
I/TC: GIC redistributor base address not provided
I/TC: Assuming default GIC group status and modifier
I/TC: SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)')
I/TC: HUK Initialized
I/TC: Primary CPU switching to normal world boot
U-Boot SPL 2024.04-00035-gfc942d8282-dirty (Apr 16 2024 - 11:47:25 +0200)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)')
SPL initial stack usage: 1840 bytes
Trying to boot from MMC1
Authentication passed
Authentication passed
U-Boot 2024.04-00035-gfc942d8282-dirty (Apr 16 2024 - 11:47:25 +0200)
SoC: AM62X SR1.0 HS-FS
DRAM: 512 MiB
Core: 138 devices, 29 uclasses, devicetree: separate
MMC: mmc@fa10000: 0, mmc@fa00000: 1
Loading Environment from MMC... OK
MISSING TORADEX CARRIER CONFIG BLOCKS
In: serial@2800000
Out: serial@2800000
Err: serial@2800000
Model: Toradex 0072 Verdin AM62 Solo 512MB WB IT V1.1B
Serial#: 15313618
am65_cpsw_nuss ethernet@8000000: K3 CPSW: nuss_ver: 0x6BA01103 cpsw_ver: 0x6BA81103 ale_ver: 0x00290105 Ports:2 mdio_freq:1000000
Setting variant to wifi
Net:
Warning: ethernet@8000000port@1 MAC addresses don't match:
Address in ROM is 64:1c:10:2a:76:c6
Address in environment is 00:14:2d:e9:aa:d2
eth0: ethernet@8000000port@1 [PRIME]Could not get PHY for ethernet@8000000port@1: addr 7
am65_cpsw_nuss_port ethernet@8000000port@2: phy_connect() failed
Hit any key to stop autoboot: 1 0
MMC: no card present
switch to partitions #0, OK
mmc0(part 0) is current device
Scanning mmc 0:1...
Found U-Boot script /boot.scr
6003 bytes read in 15 ms (390.6 KiB/s)
## Executing script at 90280000
Loading DeviceTree: k3-am625-verdin-wifi-dev.dtb
70049 bytes read in 16 ms (4.2 MiB/s)
82 bytes read in 15 ms (4.9 KiB/s)
Working FDT set to 90200000
Applying Overlay: verdin-am62_dsi-to-hdmi_overlay.dtbo
3050 bytes read in 15 ms (198.2 KiB/s)
Applying Overlay: verdin-am62_spidev_overlay.dtbo
560 bytes read in 16 ms (34.2 KiB/s)
7861931 bytes read in 76 ms (98.7 MiB/s)
Bootargs: root=PARTUUID=f360aa55-02 ro rootwait console=tty1 console=ttyS2,115200 consoleblank=0 earlycon=ns16550a,mmio32,0x02800000
Uncompressing Kernel Image to 0
## Flattened Device Tree blob at 90200000
Booting using the fdt blob at 0x90200000
Working FDT set to 90200000
ERROR: reserving fdt memory region failed (addr=9e780000 size=80000 flags=4)
ERROR: reserving fdt memory region failed (addr=9e800000 size=1800000 flags=4)
ERROR: reserving fdt memory region failed (addr=9db00000 size=c00000 flags=4)
Loading Device Tree to 0000000098ed5000, end 0000000098f09fff ... OK
Working FDT set to 98ed5000
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 6.1.80+git.0d9f1748ac17 (oe-user@oe-host) (aarch64-tdx-linux-gcc (GCC) 11.4.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT Thu Mar 28 13:48:11 UTC 2024
[ 0.000000] Machine model: Toradex Verdin AM62 WB on Verdin Development Board
[ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '')
[ 0.000000] printk: bootconsole [ns16550a0] enabled
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created DMA memory pool at 0x000000009db00000, size 12 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-memory@9db00000, compatible id shared-dma-pool
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000080000000-0x000000009fffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080000000-0x000000009dafffff]
[ 0.000000] node 0: [mem 0x000000009db00000-0x000000009e6fffff]
[ 0.000000] node 0: [mem 0x000000009e700000-0x000000009e77ffff]
[ 0.000000] node 0: [mem 0x000000009e780000-0x000000009fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000009fffffff]
[ 0.000000] cma: Reserved 128 MiB at 0x0000000090e00000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] psci: SMC Calling Convention v1.4
[ 0.000000] percpu: Embedded 20 pages/cpu s41064 r8192 d32664 u81920
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129024
[ 0.000000] Kernel command line: root=PARTUUID=f360aa55-02 ro rootwait console=tty1 console=ttyS2,115200 consoleblank=0 earlycon=ns16550a,mmio32,0x02800000
[ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 326452K/524288K available (11072K kernel code, 1354K rwdata, 3784K rodata, 2176K init, 422K bss, 66764K reserved, 131072K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=1.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 256 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GICv3: GICv3 features: 16 PPIs
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001880000
[ 0.000000] ITS [mem 0x01820000-0x0182ffff]
[ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS
[ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19
[ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @80800000 (flat, esz 8, psz 64K, shr 0)
[ 0.000000] ITS: using cache flushing for cmd queue
[ 0.000000] GICv3: using LPI property table @0x0000000080030000
[ 0.000000] GIC: using cache flushing for LPI property table
[ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000080040000
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns
[ 0.000001] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns
[ 0.008742] Console: colour dummy device 80x25
[ 0.014002] printk: console [tty1] enabled
[ 0.018262] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=800000)
[ 0.028973] pid_max: default: 32768 minimum: 301
[ 0.033774] LSM: Security Framework initializing
[ 0.038662] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[ 0.046171] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[ 0.056437] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.063936] cblist_init_generic: Setting shift to 0 and lim to 1.
[ 0.070279] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.077702] cblist_init_generic: Setting shift to 0 and lim to 1.
[ 0.084181] rcu: Hierarchical SRCU implementation.
[ 0.089112] rcu: Max phase no-delay instances is 1000.
[ 0.095319] Platform MSI: msi-controller@1820000 domain created
[ 0.102059] EFI services will not be available.
[ 0.106992] smp: Bringing up secondary CPUs ...
[ 0.111659] smp: Brought up 1 node, 1 CPU
[ 0.115776] SMP: Total of 1 processors activated.
[ 0.120607] CPU features: detected: 32-bit EL0 Support
[ 0.125884] CPU features: detected: CRC32 instructions
[ 0.131240] CPU: All CPU(s) started at EL2
[ 0.135444] alternatives: applying system-wide alternatives
[ 0.142818] devtmpfs: initialized
[ 0.158662] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.168738] futex hash table entries: 256 (order: 2, 16384 bytes, linear)
[ 0.182772] pinctrl core: initialized pinctrl subsystem
[ 0.189190] DMI not present or invalid.
[ 0.194079] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.201486] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
[ 0.208868] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.216913] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.225140] audit: initializing netlink subsys (disabled)
[ 0.231468] thermal_sys: Registered thermal governor 'step_wise'
[ 0.231482] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.237675] audit: type=2000 audit(0.148:1): state=initialized audit_enabled=0 res=1
[ 0.252368] cpuidle: using governor menu
[ 0.256651] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.263676] ASID allocator initialised with 65536 entries
[ 0.290297] KASLR disabled due to lack of seed
[ 0.303853] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.310985] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.317422] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.324381] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[ 0.330807] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.337764] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.344190] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.351148] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[ 0.359513] k3-chipinfo 43000014.chipid: Family:AM62X rev:SR1.0 JTAGID[0x0bb7e02f] Detected
[ 0.369953] iommu: Default domain type: Translated
[ 0.375021] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.381822] SCSI subsystem initialized
[ 0.386153] usbcore: registered new interface driver usbfs
[ 0.391850] usbcore: registered new interface driver hub
[ 0.397333] usbcore: registered new device driver usb
[ 0.403196] pps_core: LinuxPPS API ver. 1 registered
[ 0.408298] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.417674] PTP clock support registered
[ 0.421897] EDAC MC: Ver: 3.0.0
[ 0.426561] FPGA manager framework
[ 0.430206] Advanced Linux Sound Architecture Driver Initialized.
[ 0.437794] clocksource: Switched to clocksource arch_sys_counter
[ 0.444485] VFS: Disk quotas dquot_6.6.0
[ 0.448574] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.463560] NET: Registered PF_INET protocol family
[ 0.469066] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.477771] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 0.486457] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.494413] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.502401] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.509996] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.516653] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.523375] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.530710] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.537085] RPC: Registered named UNIX socket transport module.
[ 0.543216] RPC: Registered udp transport module.
[ 0.548045] RPC: Registered tcp transport module.
[ 0.552870] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.559480] NET: Registered PF_XDP protocol family
[ 0.565319] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 0.576123] Initialise system trusted keyrings
[ 0.581093] workingset: timestamp_bits=46 max_order=17 bucket_order=0
[ 0.594170] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.601074] NFS: Registering the id_resolver key type
[ 0.606369] Key type id_resolver registered
[ 0.610665] Key type id_legacy registered
[ 0.614859] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.621737] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 0.682736] Key type asymmetric registered
[ 0.686951] Asymmetric key parser 'x509' registered
[ 0.692072] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 0.699876] io scheduler mq-deadline registered
[ 0.704549] io scheduler kyber registered
[ 0.714092] pinctrl-single 4084000.pinctrl: 34 pins, size 136
[ 0.721439] pinctrl-single f4000.pinctrl: 171 pins, size 684
[ 0.737297] Serial: 8250/16550 driver, 6 ports, IRQ sharing enabled
[ 0.757528] brd: module loaded
[ 0.766705] loop: module loaded
[ 0.775454] tun: Universal TUN/TAP device driver, 1.6
[ 0.781863] VFIO - User Level meta-driver version: 0.3
[ 0.788491] usbcore: registered new interface driver usb-storage
[ 0.795622] i2c_dev: i2c /dev entries driver
[ 0.802829] sdhci: Secure Digital Host Controller Interface driver
[ 0.809215] sdhci: Copyright(c) Pierre Ossman
[ 0.814135] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.820781] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.827195] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[ 0.834338] usbcore: registered new interface driver usbhid
[ 0.840065] usbhid: USB HID core driver
[ 0.845479] optee: probing for conduit method.
I/TC: Reserved shared memory is enabled
I/TC: Dynamic shared memory is enabled
I/TC: Normal World virtualization support is disabled
I/TC: Asynchronous notifications are disabled
[ 0.850116] optee: revision 4.1 (439c5ecb)
[ 0.866813] optee: dynamic shared memory is enabled
[ 0.876378] optee: initialized driver
[ 0.882761] Initializing XFRM netlink socket
[ 0.887336] NET: Registered PF_PACKET protocol family
[ 0.892634] Key type dns_resolver registered
[ 0.897563] registered taskstats version 1
[ 0.901816] Loading compiled-in X.509 certificates
[ 0.921082] ti-sci 44043000.system-controller: ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)')
[ 1.013314] omap_i2c 4900000.i2c: bus 3 rev0.12 at 100 kHz
[ 1.021160] i2c 0-0030: Fixed dependency cycle(s) with /bus@f0000/i2c@20000000/pmic@30/regulators/buck2
[ 1.064086] input: tps65219-pwrbutton as /devices/platform/bus@f0000/20000000.i2c/i2c-0/0-0030/tps65219-pwrbutton.2.auto/input/input0
[ 1.078857] rtc-ds1307 0-0032: oscillator failed, set time!
[ 1.084870] rtc-ds1307 0-0032: registered as rtc0
[ 1.089875] rtc-ds1307 0-0032: hctosys: unable to read the hardware clock
[ 1.099594] at24 0-0050: supply vcc not found, using dummy regulator
[ 1.106699] at24 0-0050: 256 byte 24c02 EEPROM, writable, 16 bytes/write
[ 1.113665] omap_i2c 20000000.i2c: bus 0 rev0.12 at 400 kHz
[ 1.122388] pca953x 1-0021: supply vcc not found, using dummy regulator
[ 1.129429] pca953x 1-0021: using no AI
[ 1.153942] pca953x 1-0021: failed writing register
[ 1.159185] pca953x: probe of 1-0021 failed with error -121
[ 1.165720] at24 1-0057: supply vcc not found, using dummy regulator
[ 1.173052] at24 1-0057: 256 byte 24c02 EEPROM, writable, 16 bytes/write
[ 1.180025] omap_i2c 20010000.i2c: bus 1 rev0.12 at 100 kHz
[ 1.187181] omap_i2c 20020000.i2c: bus 2 rev0.12 at 100 kHz
[ 1.194111] omap_i2c 20030000.i2c: bus 4 rev0.12 at 100 kHz
[ 1.200205] ti-sci-intr 4210000.interrupt-controller: Interrupt Router 5 domain created
[ 1.208636] ti-sci-intr bus@f0000:interrupt-controller@a00000: Interrupt Router 3 domain created
[ 1.218007] ti-sci-inta 48000000.interrupt-controller: Interrupt Aggregator domain 28 created
[ 1.231963] ti-udma 485c0100.dma-controller: Number of rings: 82
[ 1.241104] ti-udma 485c0100.dma-controller: Channels: 48 (bchan: 18, tchan: 12, rchan: 18)
[ 1.253256] ti-udma 485c0000.dma-controller: Number of rings: 150
[ 1.264900] ti-udma 485c0000.dma-controller: Channels: 35 (tchan: 20, rchan: 15)
[ 1.276261] 4a00000.serial: ttyS3 at MMIO 0x4a00000 (irq = 291, base_baud = 3000000) is a 8250
[ 1.286803] 2800000.serial: ttyS2 at MMIO 0x2800000 (irq = 292, base_baud = 3000000) is a 8250
[ 1.295801] printk: console [ttyS2] enabled
[ 1.295801] printk: console [ttyS2] enabled
[ 1.304305] printk: bootconsole [ns16550a0] disabled
[ 1.304305] printk: bootconsole [ns16550a0] disabled
[ 1.315813] 2810000.serial: ttyS0 at MMIO 0x2810000 (irq = 293, base_baud = 3000000) is a 8250
[ 1.325528] omap8250 2850000.serial: PM domain pd:156 will not be powered off
[ 1.333090] 2850000.serial: ttyS4 at MMIO 0x2850000 (irq = 294, base_baud = 3000000) is a 8250
[ 1.341943] serial serial0: tty port ttyS4 registered
[ 1.348852] davinci_mdio 8000f00.mdio: Configuring MDIO in manual mode
[ 1.393804] davinci_mdio 8000f00.mdio: davinci mdio revision 9.7, bus freq 1000000
[ 1.402914] am65-cpsw-nuss 8000000.ethernet: initializing am65 cpsw nuss version 0x6BA01103, cpsw version 0x6BA81103 Ports: 3 quirks:00000006
[ 1.415992] am65-cpsw-nuss 8000000.ethernet: initialized cpsw ale version 1.5
[ 1.423182] am65-cpsw-nuss 8000000.ethernet: ALE Table size 512
[ 1.430115] am65-cpsw-nuss 8000000.ethernet: CPTS ver 0x4e8a010c, freq:500000000, add_val:1 pps:0
[ 1.440788] am65-cpsw-nuss 8000000.ethernet: set new flow-id-base 19
[ 1.458899] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
[ 1.464499] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 1
[ 1.472331] xhci-hcd xhci-hcd.3.auto: USB3 root hub has no ports
[ 1.478355] xhci-hcd xhci-hcd.3.auto: hcc params 0x0258fe6d hci version 0x110 quirks 0x0000008020010010
[ 1.487847] xhci-hcd xhci-hcd.3.auto: irq 299, io mem 0x31100000
[ 1.494975] hub 1-0:1.0: USB hub found
[ 1.498843] hub 1-0:1.0: 1 port detected
[ 1.639647] mmc0: CQHCI version 5.10
[ 1.645286] gpio-488 (PCIE_1_RESET#): hogged as output/low
[ 1.654044] gpio-427 (CTRL_SLEEP_MOCI#): hogged as output/high
[ 1.671552] davinci_mdio 8000f00.mdio: Configuring MDIO in manual mode
[ 1.690765] mmc0: SDHCI controller on fa10000.mmc [fa10000.mmc] using ADMA 64-bit
[ 1.717790] davinci_mdio 8000f00.mdio: davinci mdio revision 9.7, bus freq 1000000
[ 1.731009] mdio_bus 8000f00.mdio: MDIO device at address 7 is missing.
[ 1.737725] davinci_mdio 8000f00.mdio: phy[0]: device 8000f00.mdio:00, driver TI DP83867
[ 1.749853] sdhci-am654 fa00000.mmc: Got CD GPIO
[ 1.755590] sdhci-am654 fa20000.mmc: allocated mmc-pwrseq
[ 1.762660] debugfs: Directory 'pd:182' with parent 'pm_genpd' already present!
[ 1.770061] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[ 1.777282] mmc1: CQHCI version 5.10
[ 1.781229] mmc2: CQHCI version 5.10
[ 1.790433] input: gpio-keys as /devices/platform/gpio-keys/input/input1
[ 1.801065] mmc0: Command Queue Engine enabled
[ 1.806019] mmc0: new HS200 MMC card at address 0001
[ 1.812685] mmcblk0: mmc0:0001 M04A11 3.64 GiB
[ 1.821196] mmcblk0: p1 p2
[ 1.825647] mmcblk0boot0: mmc0:0001 M04A11 4.00 MiB
[ 1.830724] mmc2: SDHCI controller on fa20000.mmc [fa20000.mmc] using ADMA 64-bit
[ 1.840451] mmc1: SDHCI controller on fa00000.mmc [fa00000.mmc] using ADMA 64-bit
[ 1.849028] mmcblk0boot1: mmc0:0001 M04A11 4.00 MiB
[ 1.855721] ALSA device list:
[ 1.859032] No soundcards found.
[ 1.863725] mmcblk0rpmb: mmc0:0001 M04A11 4.00 MiB, chardev (241:0)
[ 1.877754] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none.
[ 1.886544] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 1.894806] devtmpfs: mounted
[ 1.899448] Freeing unused kernel memory: 2176K
[ 1.904237] Run /sbin/init as init process
[ 1.935781] mmc2: new ultra high speed DDR50 SDIO card at address 0001
[ 1.974596] hub 1-1:1.0: USB hub found
[ 1.979376] hub 1-1:1.0: 4 ports detected
[ 2.044626] systemd[1]: System time before build time, advancing clock.
[ 2.090508] NET: Registered PF_INET6 protocol family
[ 2.097294] Segment Routing with IPv6
[ 2.101112] In-situ OAM (IOAM) with IPv6
[ 2.129609] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid)
[ 2.161915] systemd[1]: Detected architecture arm64.
Welcome to [1mTDX Wayland with XWayland 6.6.0+build.12 (kirkstone)[0m!
[ 2.215565] systemd[1]: Hostname set to <verdin-am62-15313618>.
[ 2.341972] usb 1-1.4: new high-speed USB device number 3 using xhci-hcd
[ 2.817374] systemd[1]: Queued start job for default target Graphical Interface.
[ 2.877711] systemd[1]: Created slice Slice /system/getty.
[[0;32m OK [0m] Created slice [0;1;39mSlice /system/getty[0m.
[ 2.900740] systemd[1]: Created slice Slice /system/modprobe.
[[0;32m OK [0m] Created slice [0;1;39mSlice /system/modprobe[0m.
[ 2.924602] systemd[1]: Created slice Slice /system/serial-getty.
[[0;32m OK [0m] Created slice [0;1;39mSlice /system/serial-getty[0m.
[ 2.948185] systemd[1]: Created slice User and Session Slice.
[[0;32m OK [0m] Created slice [0;1;39mUser and Session Slice[0m.
[ 2.970517] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[[0;32m OK [0m] Started [0;1;39mDispatch Password …ts to Console Directory Watch[0m.
[ 2.994551] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[[0;32m OK [0m] Started [0;1;39mForward Password R…uests to Wall Directory Watch[0m.
[ 3.018620] systemd[1]: Reached target Host and Network Name Lookups.
[[0;32m OK [0m] Reached target [0;1;39mHost and Network Name Lookups[0m.
[ 3.042022] systemd[1]: Reached target Path Units.
[[0;32m OK [0m] Reached target [0;1;39mPath Units[0m.
[ 3.062290] systemd[1]: Reached target Remote File Systems.
[[0;32m OK [0m] Reached target [0;1;39mRemote File Systems[0m.
[ 3.086176] systemd[1]: Reached target Slice Units.
[[0;32m OK [0m] Reached target [0;1;39mSlice Units[0m.
[ 3.106204] systemd[1]: Reached target Swaps.
[[0;32m OK [0m] Reached target [0;1;39mSwaps[0m.
[ 3.174555] systemd[1]: Listening on RPCbind Server Activation Socket.
[[0;32m OK [0m] Listening on [0;1;39mRPCbind Server Activation Socket[0m.
[ 3.198487] systemd[1]: Reached target RPC Port Mapper.
[[0;32m OK [0m] Reached target [0;1;39mRPC Port Mapper[0m.
[ 3.223769] systemd[1]: Listening on Syslog Socket.
[[0;32m OK [0m] Listening on [0;1;39mSyslog Socket[0m.
[ 3.246940] systemd[1]: Listening on initctl Compatibility Named Pipe.
[[0;32m OK [0m] Listening on [0;1;39minitctl Compatibility Named Pipe[0m.
[ 3.272058] systemd[1]: Listening on Journal Audit Socket.
[[0;32m OK [0m] Listening on [0;1;39mJournal Audit Socket[0m.
[ 3.295278] systemd[1]: Listening on Journal Socket (/dev/log).
[[0;32m OK [0m] Listening on [0;1;39mJournal Socket (/dev/log)[0m.
[ 3.319902] systemd[1]: Listening on Journal Socket.
[[0;32m OK [0m] Listening on [0;1;39mJournal Socket[0m.
[ 3.346342] systemd[1]: Listening on Network Service Netlink Socket.
[[0;32m OK [0m] Listening on [0;1;39mNetwork Service Netlink Socket[0m.
[ 3.373173] systemd[1]: Listening on udev Control Socket.
[[0;32m OK [0m] Listening on [0;1;39mudev Control Socket[0m.
[ 3.396158] systemd[1]: Listening on udev Kernel Socket.
[[0;32m OK [0m] Listening on [0;1;39mudev Kernel Socket[0m.
[ 3.420658] systemd[1]: Listening on User Database Manager Socket.
[[0;32m OK [0m] Listening on [0;1;39mUser Database Manager Socket[0m.
[ 3.470927] systemd[1]: Mounting Huge Pages File System...
Mounting [0;1;39mHuge Pages File System[0m...
[ 3.515082] systemd[1]: Mounting POSIX Message Queue File System...
Mounting [0;1;39mPOSIX Message Queue File System[0m...
[ 3.562672] systemd[1]: Mounting Kernel Debug File System...
Mounting [0;1;39mKernel Debug File System[0m...
[ 3.581340] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing).
[ 3.614544] systemd[1]: Mounting Temporary Directory /tmp...
Mounting [0;1;39mTemporary Directory /tmp[0m...
[ 3.662799] systemd[1]: Starting Create List of Static Device Nodes...
Starting [0;1;39mCreate List of Static Device Nodes[0m...
[ 3.714853] systemd[1]: Starting Load Kernel Module configfs...
Starting [0;1;39mLoad Kernel Module configfs[0m...
[ 3.766948] systemd[1]: Starting Load Kernel Module drm...
Starting [0;1;39mLoad Kernel Module drm[0m...
[ 3.814988] systemd[1]: Starting Load Kernel Module fuse...
Starting [0;1;39mLoad Kernel Module fuse[0m...
[ 3.837090] fuse: init (API version 7.37)
[ 3.874358] systemd[1]: Starting RPC Bind...
Starting [0;1;39mRPC Bind[0m...
[ 3.918981] systemd[1]: Starting File System Check on Root Device...
Starting [0;1;39mFile System Check on Root Device[0m...
[ 3.971035] systemd[1]: Starting Journal Service...
Starting [0;1;39mJournal Service[0m...
[ 4.027301] systemd[1]: Starting Load Kernel Modules...
Starting [0;1;39mLoad Kernel Modules[0m...
[ 4.080708] systemd[1]: Starting Generate network units from Kernel command line...
Starting [0;1;39mGenerate network …ts from Kernel command line[0m...
[ 4.147233] systemd[1]: Starting Coldplug All udev Devices...
Starting [0;1;39mColdplug All udev Devices[0m...
[ 4.217049] systemd[1]: Started RPC Bind.
[[0;32m OK [0m] Started [0;1;39mRPC Bind[0m.
[ 4.238553] systemd[1]: Mounted Huge Pages File System.
[[0;32m OK [0m] Mounted [0;1;39mHuge Pages File System[0m.
[ 4.279047] systemd[1]: Mounted POSIX Message Queue File System.
[[0;32m OK [0m] Mounted [0;1;39mPOSIX Message Queue File System[0m.
[ 4.315020] systemd[1]: Mounted Kernel Debug File System.
[[0;32m OK [0m] Mounted [0;1;39mKernel Debug File System[0m.
[ 4.346964] systemd[1]: Mounted Temporary Directory /tmp.
[[0;32m OK [0m] Mounted [0;1;39mTemporary Directory /tmp[0m.
[ 4.380497] systemd[1]: Finished Create List of Static Device Nodes.
[[0;32m OK [0m] Finished [0;1;39mCreate List of Static Device Nodes[0m.
[ 4.419684] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 4.446457] systemd[1]: Finished Load Kernel Module configfs.
[[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module configfs[0m.
[ 4.487009] systemd[1]: Started Journal Service.
[[0;32m OK [0m] Started [0;1;39mJournal Service[0m.
[[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module drm[0m.
[[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module fuse[0m.
[[0;32m OK [0m] Finished [0;1;39mFile System Check on Root Device[0m.
[[0;32m OK [0m] Finished [0;1;39mLoad Kernel Modules[0m.
[[0;32m OK [0m] Finished [0;1;39mGenerate network units from Kernel command line[0m.
Mounting [0;1;39mFUSE Control File System[0m...
Mounting [0;1;39mKernel Configuration File System[0m...
Starting [0;1;39mRemount Root and Kernel File Systems[0m...
Starting [0;1;39mApply Kernel Variables[0m...
[[0;32m OK [0m] Mounted [0;1;39mFUSE Control File System[0m.
[[0;32m OK [0m] Mounted [0;1;39mKernel Configuration File System[0m.
[[0;32m OK [0m] Finished [0;1;39mApply Kernel Variables[0m.
[ 4.952190] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.
[[0;32m OK [0m] Finished [0;1;39mRemount Root and Kernel File Systems[0m.
Starting [0;1;39mFlush Journal to Persistent Storage[0m...
Starting [0;1;39mCreate Static Device Nodes in /dev[0m...
[ 5.094565] systemd-journald[155]: Received client request to flush runtime journal.
[[0;32m OK [0m] Finished [0;1;39mFlush Journal to Persistent Storage[0m.
[[0;32m OK [0m] Finished [0;1;39mCreate Static Device Nodes in /dev[0m.
[[0;32m OK [0m] Reached target [0;1;39mPreparation for Local File Systems[0m.
Mounting [0;1;39m/var/volatile[0m...
[ 5.275993] audit: type=1334 audit(1651167748.228:2): prog-id=5 op=LOAD
[ 5.298902] audit: type=1334 audit(1651167748.236:3): prog-id=6 op=LOAD
Starting [0;1;39mRule-based Manage…for Device Events and Files[0m...
[[0;32m OK [0m] Mounted [0;1;39m/var/volatile[0m.
Starting [0;1;39mLoad/Save Random Seed[0m...
[[0;32m OK [0m] Reached target [0;1;39mLocal File Systems[0m.
Starting [0;1;39mCreate Volatile Files and Directories[0m...
[[0;32m OK [0m] Finished [0;1;39mCreate Volatile Files and Directories[0m.
Starting [0;1;39mNetwork Time Synchronization[0m...
Starting [0;1;39mRecord System Boot/Shutdown in UTMP[0m...
[[0;32m OK [0m] Started [0;1;39mRule-based Manager for Device Events and Files[0m.
[[0;32m OK [0m] Finished [0;1;39mRecord System Boot/Shutdown in UTMP[0m.
[[0;32m OK [0m] Finished [0;1;39mColdplug All udev Devices[0m.
Starting [0;1;39mWait for udev To …plete Device Initialization[0m...
[ 6.389871] random: crng init done
[[0;32m OK [0m] Finished [0;1;39mLoad/Save Random Seed[0m.
[[0;32m OK [0m] Started [0;1;39mNetwork Time Synchronizatio[ 6.932942] systemd-journald[155]: Oldest entry in /run/log/journal/98d6394cd75d4f2dad68076443517daa/system.journal is older than the configured file retention duration (1month), suggesting rotation.
n[0m.
[[0;32m OK [0m] Reached target [0;1;39mSystem Time Set[0m.
[ 7.006135] systemd-journald[155]: /run/log/journal/98d6394cd75d4f2dad68076443517daa/system.journal: Journal header limits reached or header out-of-date, rotating.
[ 7.504857] omap8250 2b300000.serial: No clock speed specified: using default: 48000000
[ 7.513100] lm75 0-0048: supply vs not found, using dummy regulator
[ 7.524666] 2b300000.serial: ttyS1 at MMIO 0x2b300000 (irq = 485, base_baud = 3000000) is a 8250
[ 7.598553] hwmon hwmon1: temp1_input not attached to any thermal zone
[ 7.634646] ina2xx 1-0040: error configuring the device: -121
[ 7.671330] lm75 0-0048: hwmon1: sensor 'tmp1075'
[ 7.707383] nau8822 1-001a: Failed to issue reset: -121
[ 7.724486] lm75 1-004f: supply vs not found, using dummy regulator
[ 7.771641] nau8822: probe of 1-001a failed with error -121
[ 7.789487] CAN device driver interface
[ 7.830726] hwmon hwmon2: temp1_input not attached to any thermal zone
[ 7.879127] lm75 1-004f: hwmon2: sensor 'tmp75c'
[ 7.903803] m_can_platform 4e08000.can: m_can device registered (irq=0, version=32)
[[0;32m OK [0m] Found device [0;1;39m/dev/ttyS2[0m.
[ 8.018690] m_can_platform 20701000.can: m_can device registered (irq=489, version=32)
[ 8.357560] Bluetooth: Core ver 2.22
[ 8.361443] k3-m4-rproc 5000000.m4fss: device does not reserved memory regions, ret = -22
[ 8.398193] NET: Registered PF_BLUETOOTH protocol family
[ 8.442828] k3-m4-rproc 5000000.m4fss: reserved memory init failed, ret = -22
[ 8.469919] Bluetooth: HCI device and connection manager initialized
[ 8.530610] remoteproc remoteproc0: releasing 5000000.m4fss
[ 8.553175] Bluetooth: HCI socket layer initialized
[ 8.589020] k3-m4-rproc: probe of 5000000.m4fss failed with error -22
[ 8.604202] Bluetooth: L2CAP socket layer initialized
[ 8.680960] Bluetooth: SCO socket layer initialized
[ 8.782120] rtc-ti-k3 2b1f0000.rtc: registered as rtc1
[ 8.881623] platform 78000000.r5f: R5F core may have been powered on by a different host, programmed state (0) != actual state (1)
[ 9.037641] platform 78000000.r5f: configured R5F for IPC-only mode
[ 9.100848] platform 78000000.r5f: device does not have reserved memory regions, ret = -22
[ 9.135323] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 9.144308] lt8912 1-0048: supply vdd not found, using dummy regulator
[ 9.158229] lt8912 1-0048: supply vccmipirx not found, using dummy regulator
[ 9.174207] lt8912 1-0048: supply vccsysclk not found, using dummy regulator
[ 9.191784] lt8912 1-0048: supply vcclvdstx not found, using dummy regulator
[ 9.206175] lt8912 1-0048: supply vcchdmitx not found, using dummy regulator
[ 9.227389] lt8912 1-0048: supply vcclvdspll not found, using dummy regulator
[ 9.241153] lt8912 1-0048: supply vcchdmipll not found, using dummy regulator
[ 9.272838] k3_r5_rproc bus@f0000:bus@b00000:r5fss@78000000: reserved memory init failed, ret = -22
[ 9.299259] [drm] Initialized tidss 1.0.0 20180215 for 30200000.dss on minor 0
[ 9.313316] tidss 30200000.dss: [drm] Cannot find any crtc or sizes
[ 9.334329] tidss 30200000.dss: [drm] Cannot find any crtc or sizes
[ 9.375274] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 9.409068] remoteproc remoteproc0: releasing 78000000.r5f
[ 9.418689] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 9.486254] k3_r5_rproc bus@f0000:bus@b00000:r5fss@78000000: k3_r5_cluster_rproc_init failed, ret = -22
[ 9.589986] k3_r5_rproc: probe of bus@f0000:bus@b00000:r5fss@78000000 failed with error -22
[ 10.043966] mwifiex_sdio mmc2:0001:1: info: FW download over, size 570976 bytes
[[0m[0;31m* [0m] A start job is running for Wait for…ice Initialization (2s / 2min 57s)
[ 11.465914] mwifiex_sdio mmc2:0001:1: WLAN FW is active
[ 11.510599] mwifiex_sdio mmc2:0001:1: Unknown api_id: 5
M
[K[[0;1;31m*[0m[0;31m* [0m] A start job is running for Wait for…ice Initialization (2s / 2min 57s)
[ 11.564064] mwifiex_sdio mmc2:0001:1: info: MWIFIEX VERSION: mwifiex 1.0 (16.92.21.p84)
[ 11.582133] mwifiex_sdio mmc2:0001:1: driver_version = mwifiex 1.0 (16.92.21.p84)
M
[K[[0;31m*[0;1;31m*[0m[0;31m* [0m] A start job is running for Wait for…ice Initialization (3s / 2min 57s)
M
[K[ [0;31m*[0;1;31m*[0m[0;31m* [0m] A start job is running for Wait for…ice Initialization (3s / 2min 57s)
M
[K[ [0;31m*[0;1;31m*[0m[0;31m* [0m] A start job is running for Wait for…ice Initialization (4s / 2min 57s)
M
[K[ [0;31m*[0;1;31m*[0m[0;31m*[0m] A start job is running for Wait for…ice Initialization (4s / 2min 57s)
***** UART ERROR ****
UART Error Code: -1073807253
VISA Read in ModuleProcess.vi:1380011->ClimateChamberControl.viVISA Source: COM16
**********************