• State TI Thinks Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 99 subscribers
  • Views 435 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

SK-AM62A-LP: On-board JTAG

SK-AM62A-LP: AM62A7 EVM XDS110 debugger

ravi rk
Intellectual 945 points

Part Number: SK-AM62A-LP
Other Parts Discussed in Thread: AM62A7,

Hello Team,


I'm keen to explore if the XDS110 available in the AM62A7 EVM will effectively serve as a debugging tool for my custom hardware, which is based on a design similar to the AM62A7 EVM (TM4C1294NCPDTT3R not included in our custom hardware).

Regards,
Raveen
  • 0
    TI__Genius 16030 points

    Raveen,

    I don't understand your question.  Can you provide more details?  What are you envisioning implementing on your board?

    Note, we do not support implementing your own XDS110 controller for onboard JTAG.  Custom boards should use external emulators to enable debug capabilities.

    Regards,

    Melissa

  • 0 in reply to melissaw
    Intellectual 945 points

    Melissaw,

    I have an SK-AM62A-LP evaluation board. Would removing the resistor marked in the image below and connecting my custom board's JTAG to those resistor terminals suffice for functionality?

    Regards,

    Raveen

  • 0 in reply to ravi rk
    TI__Genius 16030 points

    Hi Raveen,

    Thanks for the additional explanation. 

    No, removing the resistor marked in the image below and connecting your custom board's JTAG to those resistor terminals would not suffice for functionality.

    Regards,

    Melissa