Tool/software:
Hello Team,
MCAL Package: MCAL_SitaraMPU_09.01.00
In Fls driver from above mentioned MCAL Package, In FlsSector configuration parameters FlsNumberOfSectors, FlsPageSize, and FlsSectorSize are set to READONLY true.
As per AUTOSAR, these parameters should be configurable.
Could you please provide your feedback on this?
BR,
Shubham
Hello Shubham,
I think the FLsSector configured in EB Tresos is not being used. It is mentioned in the user guide
I think that is why it is not given as a configurable parameter. Let me check on this internally and get back with more details.
Regards,
Nihar Potturu.
Hello Shubham,
You can take a look at Fls_NOR_s28hs512t.h file in the MCAL SDK :
mcal_drv/mcal/board/flash/inc/Fls_NOR_s28hs512t.h
This file has the OSPI flash info the flash part present in AM62x EVM.
Regards,
Nihar Potturu.
Hello Shubham,
In this case Fls sector configuration is not configurable by user and it should be used same as in Fls_NOR_s28hs512t.h or Fls_NOR_s28hs512t.h can be modified for sector configuration as per requirement?
Yes, the header files present in the MCAL SDK are for specific flashes tested by TI.
For any other custom flash part, customers will have to create similar files with sector configurations as per that flash part's datasheet.
Regards,
Nihar Potturu
