• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 100 subscribers
  • Views 316 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

PROCESSOR-SDK-AM62A: [AM62A]Exposure Settings for IMX623 on AM62A

TS_Wangqiang
Prodigy 40 points
Part Number: PROCESSOR-SDK-AM62A

Tool/software:

HI ti

The AE module of AM62A has only one set of SHT/GAIN, but the SHT of 623 has two sets of SP1 and SP2, and the GAIN has four sets of SP1H/SP1L/SP2H/SP2L.

How should we configure the driver? How should exposure time and gain be set?

  • 0
    TI__Guru 52895 points

    Hi,

    TI's 2A algorithm takes a single value for gain and a single value for exposure time. You'll need to do the proper mapping between what TI's 2A expects and what the sensor expects. Please refer to the AM6xA ISP Tuning Guide, section 5.4.2 "Add Exposure Setting for 2A Algorithm".

    Regards,

    Jianzhong