• State
  • Locked Locked
  • Replies 0 replies
  • Subscribers 97 subscribers
  • Views 253 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

OMAP3530 8GB FLASH solution

Lizhe Liu
Prodigy 70 points
Other Parts Discussed in Thread: OMAP3530

Hi,

I desinged one board which is based on OMAP3530 processor. In the board I want to use 8GB flash to store data. But I found the description in the datasheet of OMAP3530 said its GPMC model only support 1Gbyte(In chapter 11, page 1061, The GPMC supports up to eight chip-select regions of programmable size, and programmable base addresses in a total address space of 1 Gbyte. )

Therefor I want to know how to implement 8GB Flash for OMAP3530 processor. Does it need use I/O interface to simulate flash timing? I am now looking for a step by step guide for this solution under WinCE.

I'll be grateful for any help.

Thank you in advance.