LINUXSDK-OMAPL138: Unable to get PHP7.1 for OMAPL138 SoC

Hi Mitesh,

I've asked one of our admins to see if the files are recoverable but since the post is 8 years old we may be limited what can be done here.

Best course of action might be to setup the SDK/Yocto build environment for the corresponding SDK, and either cross-compile the related packages, or generate the packages through Yocto itself. Given how "old" everything is that's probably a day's worth of effort I suppose.

Perhaps you can also try to harvest the files you need from a running/deployed system, and just re-package them?

Regards, Andreas

Hi Andreas, thanks for your email.

I was doing exactly this yesterday. I managed to find some files from old system for openssl, lighttpd and PHP but after replacing these files I get PHP server error. may be due to some library .so files not in correct location or version. for example there is php5 folder in /usr/lib/php5/php but not sure for php7 we need /usr/lib/php7/php 

If the admin team are unable to get the package would you please have time to create this for us, would it be possible?

Thanks  

The admin is still working on this, and apparently there's others also looking for older files. Still waiting for a conclusion on this.
I'm out of the office for the next two days; will let you know any updates once I'm back.

Regards, Andreas

Thanks for the update. Much Appreciated. 

Hello, any update on this please? 

Hi,

Andreas is currently out of office and will return next week, please expect delays in response.

Regards,
Krunal

Dear Andreas, any update on this please.

Thanks 

I was told this was supposed to take a few days but I've not heard back from the internal team yet. Let me ping them and see.

Regards, Andreas

Quick update here. The IT team is still working on this; they have a higher priority issue they are currently working through with our E2E platform vendor; then this one should be next. There's other people waiting on "lost files", so this will definitely get attention, it just takes a bit for the team to get to it.

Regards, Andreas

Thanks for the update Andreas. Hope to hear back from you soon. 

Cheers 

Hi Andreas, any luck with the admin team please? 

Hi Mitesh,

Can you please check the packages in the other thread? I believe they are back online later yesterday,

HI Bin Liu, that is great thanks a lot, I will test these soon.

However, the lighthttpd seems to not be downloadable 

Sorry Mitesh, yes I can see the lightttpd package is still not available. It was missed. We will let you know once this package is available. Thanks for your patience.

HI Bin Liu, managed to download all the package and moved on the OMAPL138 File System, but have following error and hoping this will be fixed once we get the lightthpd 

lighttpd -t -f lighttpd.conf
can't handle '$HTTP[url] =~ ...' as you compiled without pcre support.
(perhaps just a missing pcre-devel package ?)
2024-09-11 16:03:29: (configfile.c.1150) source: lighttpd.conf line: 133 pos: 3 parser failed somehow near here: {
root@F280Series-10-8-0-50:/etc#

Hi Bin Liu, any update on this please?

Hi Bin, any update on this please..... 

Hi Mitesh,

Sorry for the delay. Please download the lighttpd package linked below.

6283.lighttpd-1.4.43.tar.gz

Please note that while we can provide the files, we are unable to answer questions about using the files, so we will not be able to answer questions about potential build issues.

Regards,

Nick

Hi Bin, thanks for this however, this version has issue with the folder location and "5315.lighttpd.tar.gz" was created to address that , can we get this version please? 

Thanks 

understood! we are hoping with the correct version of the lighttpd we will have a working solution. 

Thanks  

We have requested that file. Bin will update when we get it, feel free to ping the thread in a few days if we have not replied back.

Regards,

Nick

Thanks.

HI Bin, any update on this please?

Would it be possible to get these files next week?

Thanks 

Thanks a lot Bin!

This seems to be working for us!

root@F280Series-10-8-0-50:/etc/systemd/system# php -v
PHP 7.0.15 (cli) (built: Feb 3 2017 14:35:57) ( NTS )
Copyright (c) 1997-2017 The PHP Group
Zend Engine v3.0.0, Copyright (c) 1998-2017 Zend Technologies
root@F280Series-10-8-0-50:/etc/systemd/system# lighttpd -v
lighttpd/1.4.43 - a light and fast webserver
Build-Date: Dec 7 2016 15:24:04

Hi Mitesh,

Glad to see the issue is resolved. Thanks for the update.

HI Bin, on testing we are still getting the following error: will try to debug to see if we can resolve here but do you have any idea on this error please? 

lighttpd -t -f lighttpd.conf
can't handle '$HTTP[url] =~ ...' as you compiled without pcre support.
(perhaps just a missing pcre-devel package ?)
2024-09-11 16:03:29: (configfile.c.1150) source: lighttpd.conf line: 133 pos: 3 parser failed somehow near here: {

Sorry Mitesh, we don't have experience in this.

Thanks bin.

Sorry for asking more!

would we get these to ensure the pcre was added later on?

3010.libxml2-2.9.4.tar.gz

1614.php7.1.0.tar.gz

Cheers,

Mitesh Hiran said:

would we get these to ensure the pcre was added later on?

3010.libxml2-2.9.4.tar.gz

1614.php7.1.0.tar.gz

I don't understand what you are asking here, can you please clarify.

Regards, Andreas

Hi Andreas, Bin had giving me access to the old files to get the PHP v7 working on the OMAPL138 and after testing with the packages there is still once pcre missing in the lighttpd package. But we have used all the package from that post in past and got it working.

Therefore, wanted to get the last two packages from the same web-post to test,

3010.libxml2-2.9.4.tar.gz

1614.php7.1.0.tar.gz

Thanks

Thanks Andreas, got the files. 

Cheers