TDA4AL-Q1: 当我使用DCC工具连接TDA4AL板子时出现，Error in capturing the RAW image.

wang.chenxi

Part Number: TDA4AL-Q1

Tool/software:

从板端获取图片失败了，DCC工具的overview文档中的 live tuning说明中以及之前的网络配置、代码运行都做了，但是在获取的时候出现错误；

请问需要配置Camera Information & Control中的 Memory View吗， Raw file parameters中的参数我已经配置了，PC和板端可以ping通

0 Gang Hua 4 months ago

Hi chenxi,

Do you run single-cam app on TDA4AL EVM?

0 wang.chenxi 4 months ago in reply to Gang Hua

no，run 多相机app

0 Gang Hua 4 months ago in reply to wang.chenxi

Multi-cam app does not support tuning tool.

You will have to use single-cam app.

0 wang.chenxi 4 months ago in reply to Gang Hua

Thanks, I will try it

0 Gang Hua 4 months ago in reply to wang.chenxi

When you try the single-cam app, you shall see some messages printed on the screen about tuning tool support.

Processors forum