This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software:
Hi TI Expert,
How can we use AM64x/ AM243x - MCU+SDK to enable PCIE based Precision Time Measurement (PTM) ?
Regards
Hi,
As per MCU+SDK 9.2.1 release, we do not have any example to showcase PCIE-PTM capability. So officially, it is not supported.
Just to enable you while we add the support in mainline SDK, you can refer below steps:
Assumption: You are working on AM243x/AM64x -HSFS- evm
Setup:
Results:
Note:
To achieve better synchronization between RC and EP, you should modify your setup as mentioned in "section 4 Test Setup" in App Note
EP side only:
Regards
Ashwani