TDA4AL-Q1: How to access ox05b1s sensor data from TI CSI2RX driver through ioctl

Rakshitha A

Part Number: TDA4AL-Q1

Tool/software:

we are working on TDA4AL board we are using ox05b1s image sensor and implemented serializer(max96717) and deserializer(max96714) logic in camera(image) sensor driver code.

now how to access these data from csi2rx driver code through ioctl

10 months ago

0 Nikhil Dasan 10 months ago

TI__Guru* 84916 points

Hi,

May I know if you are using csi2rc linux or RTOS driver here?

Rakshitha A said:
how to access these data from csi2rx driver code

By data here, you mean to stream the frames and capture via csi2rx?

Regards,

Nikhil

0 Rakshitha A 10 months ago in reply to Nikhil Dasan

Prodigy 70 points

Iam using csi2rx linux not a RTOS

0 Rakshitha A 10 months ago in reply to Nikhil Dasan

Prodigy 70 points

Iam using csi2rx linux not a RTOS
yes to stream the frames and capture via csi2rx.

0 Fabiana Jaimes 10 months ago in reply to Rakshitha A

TI__Mastermind 19680 points

Hi Rakshitha,

We have no specific applications for the ox05b1s image sensor and MAXIM SerDes due to these devices not being supported out of box for any of our devices. Have you enabled your sensor set up and validated functionality? What part of the process are you currently on? If you are still working on validating functionality, see the following FAQ list: https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1403223/faq-most-common-problems-encountered-when-developing-camera-applications-on-the-am6x

Thank you,

Fabiana

Processors

Processors forum

TDA4AL-Q1: How to access ox05b1s sensor data from TI CSI2RX driver through ioctl