• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 98 subscribers
  • Views 200 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AM62A3-Q1: Two independent RMII interface, multiplexing with CAN

Satish Ghariya
Prodigy 20 points
Part Number: AM62A3-Q1
Other Parts Discussed in Thread: AM62A3, SYSCONFIG,

Tool/software:

Hi TI support team,

I need two independent RMII interface. Are there any limitation or  multiplexing with CAN port. Because I also need 3 independent CAN channel

Can I operated 2 independent RMII and 3 independent CAN simultaneously?

Regards,
Satish

  • 0
    TI__Mastermind 40130 points

    Hi,

    What OS will be used? Assuming Linux and from a A53 interface access perspective the sysconfig tool for the AM62A3 (should work for the AM62a3-Q1) would allow this configuration. I need to add the question is not complete though as there are several other interfaces that need to be defined that could impact the interface selection and pin muxing. I recommend using the sysconfig tool on ti.com to configure a potential application and see if your application would fit on the device.

    https://www.ti.com/tool/SYSCONFIG

    Best Regards,

    Schuyler