SK-AM69: Can a host device be connected to the USB-C connector?

Kate

Part Number: SK-AM69
Other Parts Discussed in Thread: AM69

Tool/software:

Hello,

I am designing a board using the AM69 processor using the SK-AM69 evaluation board as a reference design. Can a host device be connected to the USB-C connector on the SK-AM69?

Thanks for your help.

10 months ago

0 ShreyasRao 10 months ago

TI__Guru 62200 points

Kate,

There are 2 type-C connectors on the AM69 board.

One of them J24 will be used for powering up the board.

The other one can be used for a USB 3.0 type-C interface supporting the DFP role through the hub.

0 Kate 10 months ago in reply to ShreyasRao

Prodigy 40 points

Thanks for your reply. I was referring to the second one (the USB type-C interface that is connected to the hub). Because it is DFP, can you only connect a downstream device to it, not an upstream device?