• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 98 subscribers
  • Views 208 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMDSCNCD263P: Mismatches between User's guide and schematics

Koichiro Tashiro
Mastermind 22945 points
Part Number: TMDSCNCD263P


Tool/software:

Hi,

My customer found below mismatch between user's guide (spruj86c.pdf) and schematics (PROC159A(001)_SCH.pdf).
In table 2-32 in users guide, HSEC pin#98 is connected to ball N16 (MDIO0_MDIO, GPIO41).
On the other hand in schematics, HSEC pin#98 is directly connected to HSEC_5V0.
Which one is correct?

Thanks and regards,
Koichiro Tashiro