Where to find the old version OMAPFlash? not the current FlashTool

Frank Zhang39243

Other Parts Discussed in Thread: FLASHTOOL

Hi,

I got an old OMAP3530Evm board, I just want to erase the buildin WinCE, to write the uboot and linux;

but the current flashtool does't have the option for that board with 256M Ram/256M Nand. heard of the previous OMAPFlash can do that, where to find it?

Thanks

over 13 years ago

0 Michael T over 13 years ago

TI__Expert 6735 points

Frank:

For WinCE, not sure if you are looking for the program called EVMFlash or an earlier version of Flash Tool.

Previous versions of Flash Tool can be found under the files area on the GForge project:

https://gforge.ti.com/gf/project/flash/

Regards,

Michael T

0 Frank Zhang39243 over 13 years ago in reply to Michael T

Prodigy 130 points

Exactly, I'm finding the EVM Flash, can you tell me where to download it?

Thanks!

0 Michael T over 13 years ago in reply to Frank Zhang39243

TI__Expert 6735 points

If you get the WinCE BSp v6.15 source version it has three versions of EVMFlash in tools folder:

http://software-dl.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/bsp/06_15_00/index_FDS.html

Tools\EVMFlashTool_vEVM2MicronNAND ==> This is for the OMAP3EVM Rev G with Micron NAND

Tools\EVMFlashTool_vMicronNAND ==> Previos EVM with Micron NAND

Tools\EVMFlashTool_vSamsungOneNAND ==> Previous EVM with Samsung NAND

Current BSP uses pserial which includes source.

Regards,

Michael T

0 Frank Zhang39243 over 13 years ago in reply to Michael T

Prodigy 130 points

Thanks a lot.

Processors

Processors forum

Where to find the old version OMAPFlash? not the current FlashTool