• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 98 subscribers
  • Views 139 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TDA4VM: Images saved from DCC tool question

Zhang Jia Rong
Prodigy 180 points
Part Number: TDA4VM

Tool/software:

Hi TI,

I am currently using TDA4VM and otobrite IMX390 camera to do ISP Tuning.

The SDK version I use is 9.2.0.5, and the DCC Tool uses the latest version.

I would like to ask, where can I find the specifications of the images saved from DCC Tool, i.e. the .raw or .yuv image information?

  • 0
    TI__Guru 59140 points

    Hi Jiarong,

    Zhang Jia Rong said:
    where can I find the specifications of the images saved from DCC Tool, i.e. the .raw or .yuv image information?

    I suppose your question is about the images captured/saved by tuning tool from TDA4 EVM.

    The raw images are simple 16-bit binary files (same as image sensor output).

    The yuv images are typically 8-bit YUV images in NV12 format.