• State TI Thinks Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 100 subscribers
  • Views 68 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TDA4AH-Q1: AR0233 run at 60FPS

Vineeth CN
Prodigy 120 points
Part Number: TDA4AH-Q1

Tool/software:

Hello TI,

     We are using 9.2 SDK and fusion 1 board (FPD link III).

I would like to know we should be able to run the Onsemi's AR0233 sensor in the Single cam default demo application with 60 FPS? If so, please guide me which all files we should do the changes.  

Thanks and Regards,

Vineeth

  • 0
    TI__Guru**** 444345 points

    Hi Vineeth,

    Please check first with Aptina if AR0233 can output at 60fps at given resolution. 

    Regards,

    Brijesh

  • 0 in reply to Brijesh Jadav
    Prodigy 120 points

    Hi Brijesh,

       Thanks for your quick support. 

    Yes, datasheet says with resolution 1920x1080 and super exposure T1+ Linear T2 mode sensor supports 60fps.

    With full resolution sensor supports up to 45fps. 

    We will configure the sensor registers according to our need. But I would like to know if the fps settings in the below file have any impact for eg: If I want my graph to run at 20 fps then the changes in line no 91 from 60 to 20fps is sufficient?

    Thanks and Regards,

    Vineeth

  • 0 in reply to Vineeth CN
    TI__Guru**** 444345 points

    Hi Vineeth,

    No, i dont think this variable is even used. For 20fps output or 60fps output, you need to change sensor settings. 

    Regards,

    Brijesh