AM62A7-Q1: Importing sysconfig file to the CodeComposer project

Yaniv Michaeli

Part Number: AM62A7-Q1
Other Parts Discussed in Thread: SYSCONFIG

Tool/software:

Hi,

We have created a sysconfig file with "TI configuration Tool" See attached TI pin map V8_YM_I2C_MCU_EN.syscfg

How we import this file into the project on the code composer?

Best Regards,

0 PaulM 3 months ago

You should use the generated c/header/dtsi file as appropriate for the sdk you are using..

—Paul

0 Tushar Thakur 3 months ago

Hi,

Yaniv Michaeli said:
How we import this file into the project on the code composer?

Which example are you trying to build?

Each example provided in MCU+SDK has its own example.syscfg file that can be modified according to the usecase.

Regards,

Tushar

0 Karan Saxena 3 months ago in reply to PaulM

Yaniv

You need to use the TI Sysconfig tool to load you V8_YM_I2C_MCU_EN.syscfg file.

2. Click on browse

2. Upload your configuration by clicking on the upload button.

3. The sysconfig tool with your configuration will launch as shown below.

4. This tool on the right will have the generated code which can then be included in your Linux/RTOS projects.

Regards

Karan

Processors forum