SK-TDA4VM: How to use DS90UB954-Q1EVM with my camera (IMX219)

Kathy Hou

Part Number: SK-TDA4VM
Other Parts Discussed in Thread: TDA4VM, DS90UB954-Q1EVM,

Tool/software:

Hello,

I would like to know how to use DS90UB954-Q1EVM with my camera on TDA4VM

I have tried to find information on making dtbo, but I don’t know where I can find the instruction and how to build the dtbo files or other files that need to be copied to my SD-card.

Could you please give us a tutorial?

Many thanks.

Regard,

Kathy

21 days ago

0 Praveen Rao 20 days ago

TI__Mastermind 39012 points

Hi,

See that you are using J721e SK.

We can refer the below documentation to setup IMX219 camera on the SK board

https://software-dl.ti.com/jacinto7/esd/processor-sdk-linux-edgeai/TDA4VM/08_06_01/exports/docs/devices/TDA4VM/linux/getting_started.html#rpiv2-imx219-raw-sensor:~:text=found%20under%20/boot.-,2.1.4.%20RPiV2(IMX219)%20Raw%20sensor,-RPiV2%20camera%20module

You can refer the below to run the relevant demo for the sensor using the Python script as shown below

5. Configuring applications — Processor SDK Linux for SK-TDA4VM Documentation

Please refer to the above two documentation to stream from imx219 sensor

Thanks.

0 Kathy Hou 18 days ago in reply to Praveen Rao

Prodigy 40 points

Hi,

Sorry, what I want to know is how to make my deserializer read my SK-TDA4VM. If a driver is needed, does the SDK provide a written description file or other tutorials?

Regard,

Kathy

0 Praveen Rao 17 days ago in reply to Kathy Hou

TI__Mastermind 39012 points

Kathy Hou said:
Sorry, what I want to know is how to make my deserializer read my SK-TDA4VM

The TI SDK has not been verified to work with the DS90UB954-Q1EVM board. The supported hardware configuration is mentioned in the above mentioned "getting_started" link. TI does not provide any written description file or tutorial outside what is already shared.

Thanks.

Processors

Processors forum

SK-TDA4VM: How to use DS90UB954-Q1EVM with my camera (IMX219)