TDA4VH-Q1: TDA4VH cam skip

Kim TaeJung

Intellectual 771 points

Part Number: TDA4VH-Q1

Tool/software:

Hi, we have configured 8CH cameras in 09_02 RTOS version and checked the display through app_multi_cam.sh.

However, if do not connect the cameras sequentially, it does not work.

For example, ch_mask 0xf works, but 0xb does not work.

Is that how it works originally?

over 1 year ago

0 Gokul S over 1 year ago

TI__Mastermind 26000 points

Hi Kim,
For now app_multi_cam works if cameras are connected in sequence starting from channel 0. Changes are required to make it work with non-sequence camera connection.

Regards,
Gokul

0 Kim TaeJung over 1 year ago in reply to Gokul S

Intellectual 771 points

Hi Gokul

Is there a patch file for non-sequence camera connection?

Regards,

Kim

0 Gokul S over 1 year ago in reply to Kim TaeJung

TI__Mastermind 26000 points

Hi Kim,

There is no patch available now.
we are working on it and will be available by end of this week.

Regards,

Gokul

+1 Gokul S over 1 year ago in reply to Gokul S

TI__Mastermind 26000 points

Hi Kim,

refer to this faq and do the same for your setup,

https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1465814/faq-tda4vm-q1-non-sequence-camera-connection-for-multi_cam_demo_app

Regards,
Gokul

0 Kim TaeJung over 1 year ago in reply to Gokul S

Intellectual 771 points

Hi Gokul,

Thanks for your help, it worked out.

Regards,

Kim

Processors

Processors forum

TDA4VH-Q1: TDA4VH cam skip