Hi, all.
I have questions about VPFE in DM368.
I have customize DM368 board ( not EVM ).
H/W configuration is
HDMI --> ADV7611 (HDMI receiver) --> VPFE (DM368)
then
kernel version is "linux-2.6.32.17-psp03.01.01.39" and modified tvp7002 device driver.
HDMI capture success using DMAI app.
But in capture reault appear black blank cause of ADV7611 output timing between Hsync and Data enable.
ADV7611 output format is YCbCr 16bit and read only register Hsync and Data enable timing in ADV7611.( timing not modified. read only )
Please tell me how to set VPFE registers for remove black blank(red box).
Help me!
