• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 97 subscribers
  • Views 259 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

sys_nreswarm input required timing

Hiroshi Kimizuka
Expert 4400 points

Hi,

I could not find the timing requirement fo the sys_nreswarm input in the AM35xx data sheet(SPRS550C).

Where can I find this AC spec ?

Thanks and Best Regards,

KIMIZUKA

 

  • 0
    TI__Expert 4400 points

    Hi,

    My customer reported that the low pulse width output on the sys_nreswarm at every 320ms is observed after 400ms low pulse input is asserted on the sys_nreswarm input.

    What is the reason to be assumed on this behavior ? 

    Is this behavior a known issue ?  If so, is there any documentation which explains it ?

    Thanks and Best Regards,

    KIMIZUKA