• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 98 subscribers
  • Views 125 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AM625: request for AM62x register calculation tool

KEISUKE TSURUYA
Prodigy 20 points
Part Number: AM625

Tool/software:

Dear Sir or Madam.

This is Keisuke Tsuruya from DMC Co., Ltd..

I am checking the Technical Reference Manual [AM62x Processors Silicon Revision 1.0
Texas Instruments Families of Products] in order to calculate [Resist value] .

Therefore, Do you have the Register calculation tool for AM62x to get [Resist value] automatically?

If possible, please send it to us.  

Thank you,

Keisuke Tsuruya

  • +1
    Prodigy 20 points

    I made a mistake in the previous mail.

     

    Wrong: [Resist value]　

    Correct:[Reset value] 

    I want to get  [Reset value] automatically.

    Dear Sir or Madam.

    This is Keisuke Tsuruya from DMC Co., Ltd..

    I am checking the Technical Reference Manual [AM62x Processors Silicon Revision 1.0
    Texas Instruments Families of Products] in order to calculate [Reset value]     .

    Therefore, Do you have the Register calculation tool for AM62x to get [Reset value] automatically?

    If possible, please send it to us.  

    Thank you,

    Keisuke Tsuruya

     

  • 0 in reply to KEISUKE TSURUYA
    TI__Guru** 101660 points

    Hello,

    I am not sure I understand.

    By [Reset value], do you mean the default value of the register bits when power is applied, before the registers have been written into?

    Most registers I am aware of list that information in the chapter 14 of the Technical Reference Manual (TRM) "Registers", under the Register Field Description "Reset".

    Regards,

    Nick