TDA4VH-Q1: C7X encountered an error during the initialization of deconvolution with group.

GUANG REN

Intellectual 350 points

Part Number: TDA4VH-Q1

Tool/software:

when the group of deconvLayer is not equal to 1， it's error to run it on board

I test with the sdk： ti-processor-sdk-rtos-j784s4-evm-09_02_00_05.tar.gz

I provide the onnx file and import config.

/cfs-file/__key/communityserver-discussions-components-files/791/group_5F00_deconv.zip

8 months ago

0 Chris Tsongas 8 months ago

TI__Genius 15310 points

Hi Guang,

Please send me the board type you are trying to run this on and the command line you used to run your model on the board.

Thanks,

Chris

0 GUANG REN 8 months ago in reply to Chris Tsongas

Intellectual 350 points

This is my infer config files：

/cfs-file/__key/communityserver-discussions-components-files/791/tidl_5F00_infer_5F00_smoke.txt

The run demo I used is TI_DEVICE_armv8_test_dl_algo_host_rt.out which compile from the source code of c7x-mma-tidl/arm-tidl

0 Adam Hua 8 months ago in reply to Chris Tsongas

TI__Expert 5025 points

Hi Chris,

I tried this model on 10.01.02 and the problem can be reproduced.

Regards,

Adam

0 Chris Tsongas 7 months ago in reply to Adam Hua

TI__Genius 15310 points

Hi Guang and Adam,

There is a patch for this made by the TIDL team that was delivered to the China team. This give a try. Adam send me a message if you need the location in CDDS.

Regards,
Chris

0 GUANG REN 7 months ago in reply to Chris Tsongas

Intellectual 350 points

We have already obtained the patch and are currently validating it.

Processors

Processors forum

TDA4VH-Q1: C7X encountered an error during the initialization of deconvolution with group.