TDA4VM-Q1: Could we use CCS to debug EB TDA4VMCR5?

Gibbs Shih

Expert 6560 points

Part Number: TDA4VM-Q1
Other Parts Discussed in Thread: TDA4VM

Tool/software:

Hi, Dear Expert.

Our customer use EB (Elektrobit) TDA4VMCR5 to development MCAL and Autosar

As far as I know, TDA4VMCR5 original support "TRACE32" and "Lauterbach" tools.

Is it possible to use CCS/XDS110 debug TDA4VMCR5?

If the answer is yes, how to do it? Do we have any document for TDA4VMCR5 with CCS debug setting?

Thank You Very Much

Gibbs

over 1 year ago

0 Ki over 1 year ago

TI__Guru**** 486221 points

Hello,

Gibbs Shih said:
Is it possible to use CCS/XDS110 debug TDA4VMCR5?

I know that CCS with XDS110 and TDA4VM is generally supported. I'm not familiar with this TDA4VMCR5 variant so I will let the device experts comment further.

Thanks

0 Takuma Fujiwara over 1 year ago in reply to Ki

TI__Guru 62263 points

Hi Gibbs,

For custom boards, if there is an onboard XDS110 or if there is a place where you can connect XDS110, it should be possible.

If XDS110 can be connected, then the setup for it will look like the steps in the following documentation: https://software-dl.ti.com/jacinto7/esd/processor-sdk-rtos-jacinto7/10_01_00_04/exports/docs/psdk_rtos/docs/user_guide/ccs_setup_j721e.html

Regards,

Takuma

Processors

Processors forum

TDA4VM-Q1: Could we use CCS to debug EB TDA4VMCR5?