TDA4VM: Two cameras with different resolutions, and I want to receive video using two capture nodes and a single graph

youngkwan yang

Part Number: TDA4VM

Tool/software:

Hello. I have two cameras with different resolutions, and I want to receive video using two capture nodes and a single graph.

I would like to know if this is possible and if there are any specific examples or methods to achieve this.

I have already tried several approaches. Please explain in detail with code.

Many thanks.

Alren Yang.

7 months ago

0 Brijesh Jadav 7 months ago

TI__Guru**** 481215 points

Hi Yang,

Well as such it is possible, but my recommendation is to use two graphs, running on a separate tasks, so that they are not dependent.

Also with single graph what issue are you facing?

Regards,

Brijesh

0 youngkwan yang 7 months ago in reply to Brijesh Jadav

Prodigy 100 points

I have already used two graphs, and it works very well. There is no issue with the camera. However, since various tasks have already been implemented in the graph, it is not possible to create two separate graphs. I would like to ask if there is an example or patch available that uses a single graph with two different resolutions and two capture nodes.

Alren yang.

0 Brijesh Jadav 7 months ago in reply to youngkwan yang

TI__Guru**** 481215 points

hi,

Unfortunately, no, we dont have such a example in the SDK, nor do we have a patch..

Regards,

Brijesh

Processors

Processors forum

TDA4VM: Two cameras with different resolutions, and I want to receive video using two capture nodes and a single graph