Tool/software:
Hi, Dear Expert
We already know our SDK support "Voltage & Thermal Management" (VTM).
reference as below
https://dev.ti.com/tirex/explore/node?node=A__AEIJm0rwIeU.2P1OBWwlaA__AM62-ACADEMY__uiYMDcq__LATEST
// SPDX-License-Identifier: GPL-2.0-only OR MIT
/*
* Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/
*/
#include <dt-bindings/thermal/thermal.h>
thermal_zones: thermal-zones {
main0_thermal: main0-thermal {
polling-delay-passive = <250>; /* milliSeconds */
polling-delay = <500>; /* milliSeconds */
thermal-sensors = <&wkup_vtm0 0>;
trips {
main0_crit: main0-crit {
temperature = <105000>; /* milliCelsius */
hysteresis = <2000>; /* milliCelsius */
type = "critical";
};
};
};
main1_thermal: main1-thermal {
polling-delay-passive = <250>; /* milliSeconds */
polling-delay = <500>; /* milliSeconds */
thermal-sensors = <&wkup_vtm0 1>;
trips {
main1_crit: main1-crit {
temperature = <105000>; /* milliCelsius */
hysteresis = <2000>; /* milliCelsius */
type = "critical";
};
};
};
};
This question is from customer, and post here for double checking.
Base on "automotive" ECU application, do you think what's the good "temperature threshold value setting" for main0-crit & main1-crit?
Thank You Very Much
Gibbs
